Duplex Printing / Two sidedHP LAser Jet M1005 MFP Windows 10

[Nishant91]

Hi Lavanya!

I can't see "finishing" option under Printing Preferences:

Under "Printing Properties", I've already set Automatic Duplexing Unit to "Installed". 

It is still not printing.

It used to work earlier flawlessly. Recently, I had to reinstall my printer. Manual duplexing has not been working ever since.

Please help.

[Valsimot]

HP Laserjet M1005 doesn't have an automatic duplex, you have the wrong driver installed.

Install drivers from the following link so you can use manual duplex.

[Nishant91]

Hi Valsimot!

I have downloaded and installed the drivers from the link given by you. The problem still persists. Even the manual duplex is not working.

[LAVANYA1]

Hello, Nishant91

please follow below instructions,

1. open device and printer,  click on your printer name

2. right click and select printing preferences.

3.  select "finishing" , u should be able to see ' print o both side"

4. select tat , apply ok.

5 open a doc, give a print and check.