Reset to default settings

[ITSIX]

Hello, 

We have a small problem, we forgot the system password for the LaserJet MFP M130fn printer(the model  is with buttons not with touchscreen), and we need to do a factory reset. What is the method to reset the NVRAM.

Thank you in advance. 

[justinkailash00]

The steps vary according to the type of control panel.

1. 2-line control panels: On the printer control panel, press the OK button.
   Figure : 2-line control panel
   
   Touchscreen control panels: From the Home screen on the printer control panel, touch the Setup button.
   Figure : Touchscreen control panel
   
2. Open the Service menu.
3. Select the Restore Defaults option, and then press or touch the OK button.
   The printer automatically restarts.

[ITSIX]

I tryed this solution, is asking for an password that we do not remember. 

[justinkailash00]

I understand that you are looking to reset the password of your printer as you do not recall it, is that right?

Not to worry, I will be glad to assist you. 

Are you able to print and scan fine from your computer?

Try using the username as "admin" and the password as "admin" (without quotes) and check if you are able to access the printer's EWS page. 

If the issue persists, reset the printer to its factory defaults. Refer to page number 131 in the user manual. 

Click here for the user manual. 

Page number 115 will help you configure a password to the printer settings. 

You would need to reconfigure the printer and on all the computers and devices you would need to reconfigure the printer. 

Let me know how it goes. 

[ITSIX]

Hello,

We tryed this solution too, doesn't work. Serial numbe of the printer is: VNCPL08352. 

Regards,

[ITSIX]

Hello,

Can you please help us with a solution? We have to reset fast because is not used in this moment. We tried from the manual, from post you sent us early but is not working.

Regards,

[ITSIX]

Hello,

Can anyone help me with a solution? Who should I talk to solve this problem?

Regards,

[ITSIX · Accepted solution]

Hello,

I am closing this discussion board.

The person whose helped me to find a solution is Jeet Singh. Many thanks to him.

Regards,

Andrei S.