Slow printing

[Jay2511]

The printer is running slow on both scanning and printing, pausing for long periods between each print and scan

[Riddle_Decipher]

@Jay2511 Welcome to HP Forums!

I have a few steps to help you out:

Step 1: Reset the printer

Resetting the printer can resolve some types of slow printing issues.

1. Turn the printer on, if it is not already on.

2. Wait until the printer is idle and silent before you continue.

3. With the printer turned on, disconnect the power cord from the rear of the printer.

4. Unplug the power cord from the wall outlet.

5. Wait at least 60 seconds.

6. Plug the power cord back into the wall outlet.

   NOTE: 

   HP recommends connecting the printer power cord directly to the wall outlet.

7. Reconnect the power cord to the rear of the printer.

8. Turn on the printer, if it does not automatically turn on.

9. Wait until the printer is idle and silent before you proceed.

Try to print. If the issue persists, continue to the next step.

Step 2: Use a different USB cable

Using a USB cable that is too long or improperly shielded can affect print speed.

If the printer is connected with a USB cable, try using a different USB cable, and then try to print. If the issue persists, continue to the next step.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 3 ONWARD

(By the end of this article all the issues should be resolved)

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.