Standy problem

[Lambiek1]

Hi, I have a hp mfp m277dw. I have to restart / wake up manually after a maximum of 8 hours. This setting is therefore a maximum of 8 hours. And not bypassing through institutions. VERY Difficult in our situation. How can I solve this. I read various reviews where this complaint is described. Can I solve it ???? 

Thank you

Hoi , ik heb een hp mfp m277dw . Deze moet ik na maximaal 8 uur handmatig weer aanzetten/ ontwaken. Deze instelling is dus maximaal 8uur. En niet te omzeilen via instellingen. ERG Lastig in onze situatie. Hoe kan ik dit oplossen. Ik lees diverse reviews waar deze klacht omschreven wordt. Kan ik het oplossen ???? Via hp site kom ik niet verder

[bellmond]

Hi there,

If you visit http://h10032.www1.hp.com/ctg/Manual/c04474163 (PDF) and see page 93, you will see the following items.

If you can see the settings ECOSMART CONSOLE on your printer, check to see other options that disable the auto shutdown or find some settings to trigger the printer. 

[Lambiek1]

Thank you  forum reaction !! 

I have bought. clock.  €5.-  Wall outlet. power. 230volt. after 7 hours, I switch off the printer and switch on 5 minutes later. automatically. bypass. This is how I prevent setting after 8 hours of showdown.

[bellmond]

Hi, I am not sure I understand your reply. But it seems that you've manually shutdown your printer..is that correct?

[Lambiek1]

Yes

And than after 5 minuut  power up.  ( so the printer stay continue  good awake

[bellmond]

Well, at least it helps you 🙂
But I wonder. Have you tried my suggestion about Eco settings?