Solved: calibration starts automatically (randomly) - HP Support Community

philmesa · ‎01-29-2020

calibration starts automatically (randomly), want to turn this off

philmesa · ‎02-07-2020

Think this is solved. On the printer settings under calibration you can set when to calibrate, it was set to 15 minutes after turning the printer on, so this made it appear to be randomly starting. Changed it to calibrate when the printer is turned on, not 15 minutes after turning on.

View solution in original post

Repairatrooper · ‎01-29-2020

In the embedded web server of the printer check under print quality. You may be able to change the frequency but on most color units you cannot turn it off as the printer needs to periodically check the alignment of the cartridges to ensure print quality.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

philmesa · ‎02-07-2020

Think this is solved. On the printer settings under calibration you can set when to calibrate, it was set to 15 minutes after turning the printer on, so this made it appear to be randomly starting. Changed it to calibrate when the printer is turned on, not 15 minutes after turning on.

calibration starts automatically (randomly)

Create an account on the HP Community to personalize your profile and ask a question