paper does not pick up seems like roller does not spin

[Tacoma96]

I have a Color Laser Jet Pro MFP M177 fw and the printer will not feed at all it seems like the roller is not spinning has any one else had simular issues with this particular printer?

[sandytechy20]

@Tacoma96

Welcome to HP Support community.

1. Open the product and remove any jammed sheets of paper.

2. Load the tray with the correct size of paper for your job.

3. Make sure the paper size and type are set correctly on the product control panel.

4. Make sure the paper guides in the tray are adjusted correctly for the size of paper. Adjust the guides to the appropriate indentation in the tray.

5. Check the product control panel to see if the product is waiting for you to acknowledge a prompt to feed the paper manually. Load paper, and continue.

6. The rollers above the tray might be contaminated. Clean the rollers with a lint-free cloth dampened with warm water.

You can refer this HP document for more assistance:- Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.