printhead not reconignized

[Michael2474]

Printhead not recognized 

[TEJ1602]

@Michael2474, Welcome to HP Support Community!

Reset the printer-

1. Turn the printer on, if it is not already on.

2. Wait until the printer is idle and silent before you continue.

3. With the printer turned on, disconnect the power cord from the rear of the printer.

4. Unplug the power cord from the wall outlet.

5. Wait at least 60 seconds.

6. Plug the power cord back into the wall outlet.

7. Reconnect the power cord to the rear of the printer.

8. Turn on the printer, if it does not automatically turn on.

9. Wait until the printer is idle and silent before you proceed.

If the issue persists, try troubleshooting steps from this document.

Let me know the outcome.

Cheers 🙂

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[TEJ1602]

@Michael2474

I did not hear back from you yet. Please let me know whether your issue is resolved or you can reach out to our phone support team for service options.

Follow the steps below to reach out to our HP Support team:

1) Click on this link - https://support.hp.com/us-en/contact-hp
2) Select your product type below.
3) Enter the serial of your device. 
4) Select the country from the drop-down. 
5) Select the appropriate option based on your preference. 
6) Fill the web-form and proceed further. 

Thank you.