HDX8000 error

[Anonymous]

Hi 

I have one HDX8000 System

System are errors during startup as shown in the attached file

Please help me how to fix it

Thanks

Long

[Anonymous]

Hello, 

If you haven't I would turn off the HDX. Unplug everything but the power and monitor and see if you have the same issue when booting up. 

[Anonymous]

Hi

I do not understand your mind
Can you  guide more detailed?

Thanks

Long

[Anonymous]

The issue are having is most likely hardware related. Though it might not be the HDX having the issue. It could be your mic or camera. It could be one of the cables have gone bad. What you would need to do is find out what part is having this issue. So first I would disconnect everything but power and monitor one. If the issue is still having it is most likely something with your HDX. If you don't have the problem then maybe the camera or mic. So if it does boot up I would turn off the HDX and connect the camera. If it boots up then turn off the unit and connect the mic. If the unit boots up maybe you just needed to have the cables reseated. If not then if could be that device and you should contact support with your issue. 

[Anonymous]

Hi

I made one by connecting accessory equipment with codec but it still error

Finally, I just connected power and monitor one but  system is so error

BR

Long

[Anonymous]

At this point in time I would contact your local Polycom support group to get the unit setup for a RMA.