cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
RadDoctor
Level 1
8 7 0 0
Message 1 of 6
2,404
Flag Post

Omen 35 response time???

HP Recommended
Omen 35

What is the response time of this upcoming monitor? All the internet sites states 4 ms or 3 ms. Unfortunately the HP site says it is 20 ms. I was considering this monitor until I saw 20 ms. I also have a hard time believing a gaming monitor could have a 20 ms response time. So who is right and who is wrong?

0 Kudos
5 REPLIES 5
banhien
Level 19
Level 19
90,349 90,226 11,598 24,880
Message 2 of 6
Flag Post
HP Recommended

Hi,

 

All information from HP and others show it has refresh rate 100Hz:

 

    http://www8.hp.com/us/en/hp-news/media-kits/2017/ces-launch.html#!omen-x-curved-display

    http://www.anandtech.com/show/10992/hp-announces-omen-x-35inch-curved-display

    http://www.144hzmonitors.com/reviews/hp-omen-x-35-review/

 

200Hz could be really good but 100Hz is sitll very good in comparison with many current monitors.

 

Regards.

 

 

 

   

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



0 Kudos
RadDoctor
Author
Level 1
8 7 0 0
Message 3 of 6
Flag Post
HP Recommended
I am not talking about refresh rate. I am referring to GTG response time. Sites like Toms Hardware etc. claim 4 ms but HP website specs say 20 ms.
0 Kudos
RadDoctor
Author
Level 1
8 7 0 0
Message 4 of 6
Flag Post
HP Recommended
Actually the 1st link you gave had a spec sheet there that claims 4 ms with over drive. That means the HP website itself is wrong. They need to fix that as it shows a 5x worse response time. Hopefully the spec sheet is correct and not the website. Thanks.
0 Kudos
banhien
Level 19
Level 19
90,349 90,226 11,598 24,880
Message 5 of 6
Flag Post
HP Recommended

Hi,

 

It only 100Hz and they said 4ms. Well you can work out yourself when you get a next frame.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.



0 Kudos
MonitorEngineer
New member
1 1 0 0
Message 6 of 6
Flag Post
HP Recommended

@banhien wrote:

Hi,

 

It only 100Hz and they said 4ms. Well you can work out yourself when you get a next frame.

 

Regards.



First of all, if you set out to be an "expert" you might wanna do some research before posting on an official forum where people are looking for advice.

 

Secondly, you come off as an arrogant **bleep** with that condecending attitude when its obvious you have no idea what you are talking about. Vertical refresh rate and pixel response time are two completely separate things. 

 

 

Now, for anyone wondering; a VA panel like the x 35 has relatively slow response times and it depends on which colors you transition between. This monitor use a very similar panel to the monitor in this review : http://www.tftcentral.co.uk/reviews/aoc_agon_ag352ucg.htm#detailed_response

 

As you can see the slowest transition is 48 ms.

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation