Printer keeps disconnecting from network when it's still connected - won't scan right

[RonB2020]

ENVY 7800 keeps disconnecting from network when it is connected. Won't scan to PDFs general screwups. won't set up through HP app

[Betty0610]

@RonB2020

Welcome to the HP Support Community.

Let's restore the network settings on the Printer: 1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard, and then touch ( Setup ). 2. Touch Network Setup. 3. Touch Restore Network Settings. A message appears stating that the network defaults will be restored. 4. Touch Yes. 5. Print the network configuration page and verify that the network settings have been reset.

Once done connect the Printer back to the Wi-Fi: 1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard, and then touch (Wireless). 2. Touch ( Settings ). 3. Touch Wireless Settings. 4. Touch Wireless Setup Wizard or Wi-Fi Protected Setup. 5. Follow the display instructions to complete the setup.

Is the issue only with scan to PDF? or all scans?

Let's run the HP Print and Scan Doctor:

Use this link for details on using the HP Print and Scan doctor: https://hp.care/2JyaC93

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the "Accept as solution" button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!