cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Fiore21
New member
3 1 0 0
Message 1 of 2
474
Flag Post

Troubleshoot: there might be a problem with your audio device

HP Recommended
Compaq Presario CQ50
Microsoft Windows 10 (32-bit)

Hi! I did a troubleshooting for my microphone audio.. I can hear other people talking but when I speak other people cannot her me.

 

the result of the troubleshooting was: there might be a problem with your audio device

 

another result: Audio services not responding detected.

 

How do I fix the audio issue?

 

Thank you!

Lucia

1 REPLY 1
The_Fossette
HP Support Agent
HP Support Agent
29,155 21,825 1,962 2,158
Message 2 of 2
Flag Post
HP Recommended

@Fiore21,

 

I reviewed your post and I understand that the microphone is not working correctly on your computer.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

I recommend you follow the below steps and check if it helps.

 

1. Run Audio Troubleshooter

  - Launch Troubleshooting by typing and clicking “Troubleshooting” in   

     Windows search.

  - Click on "Playing Audio".

  - Follow the on-screen instructions.

2. Check if microphone isn't disabled.

  - Right click on the Volume Icon on the taskbar, select "Recording Devices".

  - Click on "Show disconnected devices", and "Show disabled devices".

  - Select on Microphone, click on "Properties". If it is disabled, enable it.

  - Once enabled, set Microphone as default audio input device.

3. Check if microphone isn't muted.

  - Right Click on the Volume icon on the taskbar, select "Volume Mixer".

  - On the Microphone slider, slide it up to 100%.

4. Boost sensitivity of Microphone

  - Right Click on the Volume icon on the taskbar, select "Recording".

  - Double click on Microphone.

  - Open the Levels Tab, move the Microphone boost slider up to check audio.

 

5. Disable enhancements

  - Right Click on the Volume icon on the taskbar, select "Recording“, Double

     click on Microphone.

  - Open the Enhancements / Effects Tab.

  - Check "Disable All Sound / System Effects“. Click Apply, OK, test the Microphone again.

6. Change format of the Microphone

  - Right click on the Volume Icon on the taskbar, select "Recording Devices".

  - Double click on Microphone.

  - Go to the Advanced Tab, choose any of the 16 bit options on the list.

 

Let me know how it goes and you have a great day!

 

P.S: Welcome to the HP Support Community 😊

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

The_Fossette
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation