10-28-2016 02:29 PM
i have a notebook 6560b and i try to update bios Version:F.08 (26 Aug 2011) to 2016 for my new hhd wd sata3 black
but i have some isue
1 bios update fails ... i make a boot disk form vs Version:F.63 Rev.A (1 Jul 2016)
i try this way but no luck
Folder structure of FLASH
contains following folder structure
within BIOS folder there are two more folders and some BIN and SIG files
and within BiosUpdate
I've sticked FLASH into Laptop and rebooted. I've got the message 'BIOS update failed to update' (or something like that) and I had option just to reboot.
LOG file on FLASH had this with in.
HpBiosUpdate.txt (logfile from root)
EFI HP BIOS Update 22.214.171.124 Started
Failed init of SMBIOS data
HpBiosUpdate.txt (log file from BiosUpdate folder)
HP BIOS Image Interface Protocol Version 1.0
BattInit: Protocol 2010.
All Required Protocols Located
Lang reported as eng.
Language Selected is currently (eng).
Failed Reading BIOS Image Hewlett-Packard\BIOS\New\68SCE.bin
I can see that it can't read 68SCE.bin, but I can't see that file in New as explaned above new folder contains only
I rename these bins and sigs to 68SCE but no luck
Please advise and thanks.
11-10-2016 12:49 AM
THe BIOS version on your unit seems pretty OLD.Hence you will have to follow the hierarchy
Directly updating to Version:F.64 Rev.A (24 Oct 2016) might not be possible. BIOS versions are interrelated to the previous versions.
Recommend you to try one after the other
Then try Version:F.22 (22 Dec 2011) ,
Version:F.26 (31 May 2012), skip the rest and try Version:F.29 (4 Jan 2013) and so on..
Below is the link:
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the White Thumbs Up Button on the right to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
I am not an HP Employee