-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- After replacing HDD for an SSD at boot screen goes blank an...

Create an account on the HP Community to personalize your profile and ask a question
01-06-2022 11:58 AM - edited 01-06-2022 11:59 AM
I added an NVME stick and are booting from there without a problem switched the original HDD to be a secondary drive. Now that i am replacing the HDD for an SSD the computer goes to blank screen and caps lock blinks with 5.4 Pattern
If i remove the SSD and boot the machine with only the NVME it boots fine with no errors, Same as if i place back the HDD.
Problem is when i connect the SSD, .. I have done the Windows key + B -- to reinstall bios and immediately after that it boots fine. at next reboot i get the same blank screen
I have also used the Windows key + V to reset the CMOS, and happens the same, IT boots normally but after i reboot it goes back to same black screen
Have an the UEFI diagnostics with and without the SSD and no errors have been found
When Windows boots and its running, the SSD drive works fine and no problems
Anyone has any Idea, Please help