Boot device not found

[matini05]

Hp14-dq2088wm

[Garp_senchau]

@matini05, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

If your HP 14 is showing a "Boot Device Not Found" error, it likely means the system can't detect the storage drive or the boot configuration is incorrect.

Restore BIOS default settings

To restore the BIOS default setting, open the BIOS Setup screen.

Turn off the computer and wait five seconds.

Press the power button to start the computer and repeatedly press the f10 key to enter the BIOS setup menu.

On the BIOS Setup screen, press f9 to select and load the BIOS Setup Default settings.

Press f10 to Save and Exit.

Use the arrow keys to select Yes, and then press Enter when asked Exit Saving Changes?

Follow the prompts to restart your computer.

Kindly refer to this guide for further troubleshooting steps: HP PCs - Hard disk 3F0 boot device not found error | HP® Support

I hope these steps help resolve the issue

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

If my response helped, please mark it as an Accepted Solution! ✅ It helps others and spreads support. 💙 Also, tapping "Yes" on "Was this reply helpful?" makes a big difference! Thanks! 😊

Regards,