Boot my M.2 settings

[GeorgeOmen15]

After i put my SSD M.2 into my device .. what are boot settings and how can i do it ? .. i need an explanation.

Thanks in advance.

[Echo_Lake]

@GeorgeOmen15
Thank you for posting on the HP Support Community.

Are you trying to boot with both the hard drives connected to the computer?

If yes, then I recommend you remove the SATA hard drive and connect only the SSD and check whether the computer boots to Windows.

If you continue facing the issue, I recommend you install a fresh copy of Windows on the SSD and check if it helps.

I have a few recommendations: 

• Firstly, you need to Disable Secure Boot and enable Legacy Boot.
• Next set up the boot order sequence. 
  Ensure the operating system is installed on the SSD or the clone successfully transferred.
• Select the SSD from the list.
• Re-enable Secure Boot and save the changes.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.