-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- Dead laptop

Create an account on the HP Community to personalize your profile and ask a question
11-13-2026 10:05 AM
Welcome to the HP Support Community.
Thank you for posting your query.
I'm sorry to hear that your system has stopped working, especially considering that it is less than two years old. I understand how frustrating this must be, particularly after you've already removed the components and attempted to boot the system with a minimal configuration.
To better understand the issue, could you please provide the following details?
- What is the exact product number?
- When you press the power button, do the fans spin continuously, or does the system restart repeatedly?
- Do you notice any blinking lights on the power button, Caps Lock, or Num Lock, even briefly?
- Have you tried disconnecting all external peripherals and performing a power reset?
- Have you tested the system with a different power outlet or power adapter (if applicable)?
- When you say you removed everything from the board, did you also disconnect the RAM, storage drive, and graphics card?
- Did this issue start suddenly, or did you notice any previous symptoms such as overheating, unexpected shutdowns, or performance issues?
Please share the requested details so we can better assess whether this is related to the power supply, motherboard, memory, or another hardware component.
Take care and have an amazing day!
I'm an HP Employee.
If this reply helped resolve your issue, please select the Accept as Solution as it helps others in the community quickly find the answer they’re looking for.
And if you found this reply helpful, clicking Yes below is a great way to let us know we’re providing the support you need, as it encourages us to keep improving and sharing helpful guidance.
11-14-2026 06:14 AM
The model # is Omen 16-ae0073cl and it's really frustrating. I've never heard of a machine of this caliber fail like this. And it seems to be a reoccurring thing. Is there a recall on these things?
Thanks
Leroy
11-14-2026 11:10 AM - edited 11-14-2026 11:11 AM
Thank you for responding,
I understand how disappointing this experience must be, especially when your HP OMEN 16 is less than two years old and is no longer displaying anything despite your troubleshooting efforts.
The fact that the fans are running at high speed but there is no display or blinking LED indicator could point to a hardware initialization issue, BIOS-related problem, or a motherboard-level failure. However, further diagnosis is required before identifying the exact faulty component. Could you please try connecting the unit to an external Monitor and check.
Meanwhile I would request you to please follow the steps and the link shared:
Power States & Procedures
- Forced Reset: If the system becomes completely unresponsive, press and hold the power button down for at least 10 seconds to force the computer off.
- Power Light Behavior (keyboard area): Solid white indicates the computer is on; blinking means it is in Sleep state; off means it is powered off, in Hibernation, or completely without power.
- AC Adapter / Battery LED (right side next to the power port):
- Amber: AC adapter is connected and charging the battery.
- White: AC adapter is connected and the battery is fully charged.
- Blinking Amber: AC adapter is disconnected and battery level is low.
- Off: Battery is not receiving power from the charger.
Diagnostic Tools & Firmware Recovery
- HP PC Hardware Diagnostics UEFI: Because this runs directly outside the operating system in firmware, it is HP's tool to isolate hardware failures. To run it: power on the machine, immediately press esc repeatedly, and select f2. If a hardware component has failed, it generates a 24-digit failure ID code.
- BIOS Event Log: Pre-operating system failures are logged directly in firmware. Press esc at startup, press f10 for BIOS Setup, navigate to the Main tab, and select System Log / BIOS Event Log to check for logged hardware error events.
- Microsoft Connected System Recovery: For severe failures where the OS cannot start, the firmware supports system restoration over a wired network (RJ-45 Ethernet jack) by launching esc -> f10 -> Boot Options -> Connected System Recovery.
Have a good day
I'm an HP Employee.
If this reply helped resolve your issue, please select the Accept as Solution as it helps others in the community quickly find the answer they’re looking for.
And if you found this reply helpful, clicking Yes below is a great way to let us know we’re providing the support you need, as it encourages us to keep improving and sharing helpful guidance.