ENTER ADMINISTRATION PASSWORD OR POWER ON PASSWORD

[VIJAY3388]

Hi! 

I am facing an issue with ENTER ADMINISTRATION PASSWORD OR POWER ON PASSWORD .I have tried with all my passwords not worked. So I searched in internet I have found some tips which didn't work well.

1 TIP :

enter incorrect password until SYSTEM DISABLED and get an code. And enter the code in bios-pw.org website and get an another 8 digit code and enter it again in ENTER ADMINISTRATION PASSWORD.

I have tried but not worked and again it  is showing invalid password.

2 TIP : 

Shut down system and press windows+B key and power on button for 3 sec and remove power button while holding windows+B until BIOS recovery page is occurred.The process goes on like writing new BIOS image -> verifying new BIOS image ->continue start up-> screen empty and again screen on Saying BIOS RECOVERY (500) press ENTER to continue .I have pressed enter and again it comes to ENTER ADMINISTRATION PASSWORD OR POWER ON PASSWORD. This is happening like an loop .

[WAWood]

@VIJAY3388 

We don't provide Disable Code bypasses anymore.

I'm really sorry that we can not help you with this, but Community policy prohibits us from assisting you in any way with bypassing or resetting passwords.

For BIOS or power-on password resets, read this HP thread: https://support.hp.com/us-en/document/c06368824.

If you are not prepared to spend the money to get HP to replace the motherboard for BIOS password resets, you could take the PC to a local repair facility to see if they can do it for you -- but we are unable to assist in that.

For Admin password resets, you have to contact your regional HP Customer Support location directly for assistance.
https://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

[RodrigoB]

Hi VIJAY3388

Thank you for visiting the HP Support Community.

According to the Community's Rules of Participation:

4d. No posts shall include instructions or directions intended to bypass or subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc., or to bypass any safety measures.

Therefore, this topic is being locked. If you would like help resetting the password on your product, please Contact HP support in your region. 

Regards