Envy won’t power up, with or without adapter(s). Flashing caps-lock key 5 long - 3 short.

[Vagadon]

Envy won’t power up, with or without adapter(s). Flashing caps-lock key 5 long - 3 short.

[Anand_Andy]

Hi @Vagadon,

Welcome to the HP Support Community

I understand you are facing a boot issue with your HP product. Not to worry I will help you to get a resolution to resolve the issue.

To assist better:

• Was there any recent update on the PC?

While you respond to that please try the below steps:

Crisis BIOS Recovery

1. Turn off the computer, and then connect the power cord.
2. Press and hold the Windows key and the B key at the same time, and then press and hold the Power button for 2 to 3 seconds.

1. Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.

• If the HP BIOS Update screen does not display, repeat the previous steps but press the Windows key and the V key. If the screen still does not display, your computer might not support the feature or there is a hard drive issue. Continue to the next section to Recover the BIOS using a USB recovery drive.
• If the Power light turns off, the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for only 2 to 3 seconds.
• If a BIOS recovery message repeatedly displays, continue to the next section to Recover the BIOS using a USB recovery drive.
• If a message that the computer improperly shut down or a boot problem is detected displays, follow the on-screen instructions to resolve the error.
• If Windows starts, update to the latest BIOS version. Go to HP Notebook PCs - Updating the BIOS for more information.
  The HP BIOS Update screen displays and the recovery begins automatically.

Update the BIOS:

• Here's the link to download and install the above updates: Click here 

If the issue persists, then please follow the steps mentioned in this document: HP Notebook PCs - Computer beeps or a light blinks during startup & HP PCs - Computer does not boot or start 

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!