Error BIOS 2223 and 2224

[ac_crazy]

Hello. After replacing the battery, cmos reset BIOS settings, now when booting you receive the error 2223-EIT Failure. VT must be enabled to launch VA. Enter F10 Setup and enable Intel Virtualization Technology. After you enable VTx and VTd, you receive the error 2224-EIT Failure Embedded Security must be available to launch VA. To help configure the BIOS so that the computer began to work. The menu is missing  "Embedded Security".

[iomare]

Hi,

In Bios under the tab "Security" and in the list you find  "Device Security". Now in "Device Security" you need to make sure that "Embedded Security Device" is set to "Device available".

hh

n

Maybe this HP manual can help

http://h10032.www1.hp.com/ctg/Manual/c01159978

Hope it helps,

David

[ac_crazy]

The menu is missing  "Embedded Security".

[sergejkov]

Hi David.
I have the same error in dc7800 sff.
I read a lot of instructions, but nothing fits.
The error appeared after the processor replacement.
when the old processor was returned - the error remained.
"Embedded Security Device" in "Security -> Device security" is missing.

dts7800 is not loaded with HDD and USB. only CDD.
Please help in solving the problem.

BIOS v1.35