Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP Notebook 15-F211WM
Microsoft Windows 10 (64-bit)
I keep getting "Your PC couldn't start properly A required device isn't connected or can't be accessed Error code 0xc0000225" I have a usb drive with Windows 10 downloaded on it but I really don't know what to do, please help.
1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi,

 

Try these steps..

 

Boot the computer by turning it back on and keep on tapping ESC. Then click F11 Recovery then

select "Troubleshoot" and then "Advance Options" and try these steps:

b.Select "Advanced options" and then select "Command Prompt".

c.If prompted, enter in the password for the user name.

d.At the Command Prompt, type the following commands and hit enter.

 

bootrec /scanos

bootrec /fixMBR

bootrec /Fixboot

bootrec /rebuildBCD

 

If prompted to press yes then press Y then restart if not then type the code below

 

 

chkdsk c: /f /r /x

 

After running the commands your computer should restart and will automatically install windows update. Sometimes it will take for a while to update. Just extend your patience and wait until your computer restarted successfully. DONT LEAVE YOUR COMPUTER UNATTENDED..

 

"Education costs money; so does Ignorance"

If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!


View solution in original post

7 REPLIES 7
HP Recommended

Hi,

 

Try these steps..

 

Boot the computer by turning it back on and keep on tapping ESC. Then click F11 Recovery then

select "Troubleshoot" and then "Advance Options" and try these steps:

b.Select "Advanced options" and then select "Command Prompt".

c.If prompted, enter in the password for the user name.

d.At the Command Prompt, type the following commands and hit enter.

 

bootrec /scanos

bootrec /fixMBR

bootrec /Fixboot

bootrec /rebuildBCD

 

If prompted to press yes then press Y then restart if not then type the code below

 

 

chkdsk c: /f /r /x

 

After running the commands your computer should restart and will automatically install windows update. Sometimes it will take for a while to update. Just extend your patience and wait until your computer restarted successfully. DONT LEAVE YOUR COMPUTER UNATTENDED..

 

"Education costs money; so does Ignorance"

If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!


HP Recommended
About to try it out hope it works & thanks for the fast response!
HP Recommended

@Ma97 wrote:
About to try it out hope it works & thanks for the fast response!

Hi,

 

Crossing fingers! Hope for the best! Keep us updated.. 🙂

"Education costs money; so does Ignorance"

If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!


HP Recommended
It just finished updating. Do I exit out command prompt?
HP Recommended
A black screen popped up & it's stuck on that same screen
HP Recommended
It worked! Thanks!
HP Recommended

@Ma97 wrote:
It worked! Thanks!

Your welcome! Please accept it as a solution 🙂

"Education costs money; so does Ignorance"

If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!


† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.