• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Do you need help resolving ACPI Errors ACPI\VEN_BOOT&DEV_0000 and ACPI\VEN_PRP&DEV_0001 on HP Chromebook G2? Click here for the troubleshooting steps.
HP Recommended
Pavilion dv6
Microsoft Windows 10 (32-bit)

I upgraded my Windows 7 HP Pavilion dv6 laptop to Windows 10 about 3 yrs ago when it was free so I don't have disks to reinstall Windows 10.  I've tried all the various methods trying to get to safe mode and this is what happens: as it's starting, if I press F11 it will go to "F11... System Recovery" on the initial HP screen and NOTHING ELSE!!! no matter how long I wait.

2 REPLIES 2
HP Recommended

So it is just f 11 recovery system boot and al fal in to place and you have a new pc 

HP Recommended

Hi,

You do not need disks to reinstall Windows 10. You can download from Microsoft and it will automatically activate once installed and connected to the internet.

Here is a small guide

Download media creation tool from Microsoft on PC (different PC), run and create a bootable pendrive with the OS on it. (there is an explanation on the Microsoft web page on how to create the pendrive). Windows will automatically activate once installed and connected to the Internet.

https://www.microsoft.com/en-us/software-download/windows10

If you choose this option you will need to use the pendrive to perform a clean install of Windows 10. You might need to disable fastboot and secure boot in BIOS (probably not). So, insert the pendrive in the PC and it should boot directly from the drive. If not, turn off the PC by holding the power button. Press the power button and immediately keep pressing ESC until the startup menu appears and then press F9 and choose the pendrive in the boot menu. Once it boots from pendrive follow the procedure to install Windows. Choose Custom install and delete all partitions. Install on unallocated space.

 

When finished installing allow Windows to completely update and find all or most drivers. You can follow this process by going into settings > Security and update > click on Verify for updates. You might need to reboot a couple of times.

 

naturally, there also could be a problem with the hard drive if you are not able to install

 

Hope it helps,

David

Please click on thumbs up for thanks

Please click on accept as solution if answered your question

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.