-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- Failure ID, LONG DST FAILED PLEASE HELP

Create an account on the HP Community to personalize your profile and ask a question
08-31-2020 10:07 AM
I am having trouble with figuring out what this Failure ID I received.
I did a HP PC hardware diagnostics test and it tested the drive and the smart check passed but the long DST failed?? I don't know what that is or means.
The failure ID that I got is:
0LVL50-92GA7L-MFPW2J-619J03 and the Product ID is 1DJ47AV also it shows the current version is 1.24.0.0. I'm not sure exactly what this failure ID means I have tried to search and I can't find anything on this particular failure ID I no longer have warranty and I don't know how to fix the issue if anybody can help me or lead me into a direction I would really appreciate it.
08-31-2020 11:06 AM
Hi:
Usually the error code report does not pinpoint the issue, such as in this case...here is the report for that code, minus the serial number of your notebook...
| 0LVL50-92GA7L-MFPW2J-619J03 | OK | XXXXXXXXXX | 8/31/20 | 305 | Storage | Floppy Drive, Hard Drive, Memory Drive, Optical Drive, SCSI, Tape Drive | Hard Disk 1 Full Test Failure |
99% of the time you get one of those failure codes, it means you need to replace the hard drive and reinstall the operating system.
Below is the link to the service manual, where you can find the hard drive removal and replacement procedure.
http://h10032.www1.hp.com/ctg/Manual/c05485598
Since your notebook is a CTO (configured to order) model, I don't know whether it came with a M.2 SATA SSD, or a 2.5" mechanical hard drive.
https://partsurfer.hp.com/Search.aspx?searchText=1DJ47AV
So you will have to open it up and determine what drive needs to be replaced.
After you replace the drive, you should be able to use the HP cloud recovery tool using another Windows PC with W7 64 bit or newer on it to create a bootable USB recovery drive that will reinstall Windows 10, the drivers and the software that originally came with your notebook.
Here is an info link for how to use that utility...
https://support.hp.com/us-en/document/c06162205
You can see if your notebook is supported by the cloud recovery tool at the link below.
http://support.hp.cloud-recovery.s3-website-us-west-1.amazonaws.com/