HP Envy M6 Operating System: Windows 10 (64-Bit) The BIOS password

[geoff8080]

Product: HP Envy M6

Operating System: Microsoft Windows 10  (64-Bit)

The BIOS password was forgotten on this laptop, and I need a pin to bypass and remove/reset the BIOS password. I pressed enter 3 times to get a "System Disabled" # of   1  70540422. Please help! Thank you.

[WAWood]

@geoff8080 

That is a Disable Code but we're not permitted to provide Disable Code bypasses anymore.

Passwords can NOT be recovered; instead, they have to be reset.

If your PC reset your password on you, we can not help in that because we have no access to either the original or the new password.

We are not permitted to assist in resetting passwords due to HP Policy.
--------------------
BIOS and power-on passwords are contained in the firmware that is present inside the BIOS chips -- which are soldered to the motherboard and thus, are not replaceable. So, you can't just buy a replacement chip and swap them. Also, neither your nor HP can reset the BIOS password on the current motherboard. Thus, replacement of the motherboard is required with one that has a BIOS chip that does not have a password in the firmware. This is very expensive to do and can often cost more than simply replacing the PC

If you are not prepared to spend the money to get HP to replace the motherboard, you would have to take the PC to a local repair facility to see if they can do anything for you -- but we can not assist in that in any way.