cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
MikeS18
New member
2 1 0 0
Message 1 of 3
607
Flag Post

Solved!

HP OMEN Blink Code Error

HP Recommended
HP OMEN 15-dc0400ng
Microsoft Windows 10 (64-bit)

Hi!

 

So after noticing my OMEN 15 was going through its battery quicker then usual and then running a little too hot when plugged in I turned it off for a while. Coming back to it, it doesn't boot back up, instead the Caps Lock returns a blinking code of 3.2 (3 long, 2 short white blinks). Since then I've tried pretty much everything to do with booting it back up on/off the AC power and tried to reseat the memory modules but nothing worked. Unfortunately my HP warranty has already expired. Any ideas on what else I could try and do short of handing it over to a repair shop? 

 

Thanks a lot!

1 ACCEPTED SOLUTION

Accepted Solutions
WAWood
Level 16
Level 16
34,852 24,531 3,146 7,839
Message 2 of 3
Flag Post
HP Recommended

@MikeS18 

Software failures will generate on-screen messages, usually about not finding an Operating System or not being able to boot. When the screen is blank, the PC is experiencing a major hardware failure.
--------------------
If the CapsLock key is blinking or there is beeping, read this HP information on the likely cause of the hardware failure based on the blinking or beeping patters.

For laptops, this HP thread describes the different blink and beep codes: https://support.hp.com/us-en/document/c01732674?jumpid=reg_r1002_usen_c-001_title_r0001
--------------------
To determine the cause with hardware failures, you have to be able run diagnostics. We have no way of accessing your PC from here, so we can not do that for you. You have to do it yourself.

You do this by pressing the Esc key repeatedly when rebooting and then, when the HP Startup Menu appears, selecting Diagnostics (usually F2) and letting it run.

If it is NOT possible to run diagnostics, or if that does not work, then there is NOTHING more you can do by yourself -- and there is NOTHING we can do because we have no way of accessing your PC from here to run diagnostics or repair hardware.

You will need to have the PC physically examined in a service facility by folks that can run their own diagnostics to determine what is wrong with it.

--------------------
If your PC is still under the original one-year HP warranty, or if you have purchased an extended warranty from HP and this is still valid, then having HP do this is an inexpensive option for you. In that case, you should contact HP Customer Support to see about having it repaired or replaced under warranty.

Here is how you can get in touch with support:
Step 1. Here is the link: http://www.hp.com/contacthp/
Step 2. Select the product type.
Step 3. Enter the serial number of your device or select let HP detect your product option.
Step 4. Select the country from the drop-down.
Step 5. You should see the HP phone support number or Chat option listed.

--------------------
If your PC is no longer under warranty, then it will cost you up front to have HP examine your PC. If you want to do that, you will have to contact an HP Repair or Service Center to see if they can examine the PC to determine the cause(s) of the problems, if it can be repaired, and an estimate of the repair costs.

Since you live outside the U.S., here is a link to HP Service Centers, by Country/Region: https://support.hp.com/in-en/service-center

If you don't get useful results using the Service Center link, here is the main HP link:

https://support.hp.com/us-en/contact-hp?openCLC=true

If you can't get assistance from HP, then you will have to seek out a local laptop service facility to have them examine it for you.

Good Luck



I am a volunteer and I do not work for, nor represent, HP

View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2
WAWood
Level 16
Level 16
34,852 24,531 3,146 7,839
Message 2 of 3
Flag Post
HP Recommended

@MikeS18 

Software failures will generate on-screen messages, usually about not finding an Operating System or not being able to boot. When the screen is blank, the PC is experiencing a major hardware failure.
--------------------
If the CapsLock key is blinking or there is beeping, read this HP information on the likely cause of the hardware failure based on the blinking or beeping patters.

For laptops, this HP thread describes the different blink and beep codes: https://support.hp.com/us-en/document/c01732674?jumpid=reg_r1002_usen_c-001_title_r0001
--------------------
To determine the cause with hardware failures, you have to be able run diagnostics. We have no way of accessing your PC from here, so we can not do that for you. You have to do it yourself.

You do this by pressing the Esc key repeatedly when rebooting and then, when the HP Startup Menu appears, selecting Diagnostics (usually F2) and letting it run.

If it is NOT possible to run diagnostics, or if that does not work, then there is NOTHING more you can do by yourself -- and there is NOTHING we can do because we have no way of accessing your PC from here to run diagnostics or repair hardware.

You will need to have the PC physically examined in a service facility by folks that can run their own diagnostics to determine what is wrong with it.

--------------------
If your PC is still under the original one-year HP warranty, or if you have purchased an extended warranty from HP and this is still valid, then having HP do this is an inexpensive option for you. In that case, you should contact HP Customer Support to see about having it repaired or replaced under warranty.

Here is how you can get in touch with support:
Step 1. Here is the link: http://www.hp.com/contacthp/
Step 2. Select the product type.
Step 3. Enter the serial number of your device or select let HP detect your product option.
Step 4. Select the country from the drop-down.
Step 5. You should see the HP phone support number or Chat option listed.

--------------------
If your PC is no longer under warranty, then it will cost you up front to have HP examine your PC. If you want to do that, you will have to contact an HP Repair or Service Center to see if they can examine the PC to determine the cause(s) of the problems, if it can be repaired, and an estimate of the repair costs.

Since you live outside the U.S., here is a link to HP Service Centers, by Country/Region: https://support.hp.com/in-en/service-center

If you don't get useful results using the Service Center link, here is the main HP link:

https://support.hp.com/us-en/contact-hp?openCLC=true

If you can't get assistance from HP, then you will have to seek out a local laptop service facility to have them examine it for you.

Good Luck



I am a volunteer and I do not work for, nor represent, HP
Was this reply helpful? Yes No
MikeS18
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Hitting the Esc button (but only while plugged in by the power cable) did the trick. Thanks!

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation