cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
MissCH
New member
2 1 0 0
Message 1 of 3
139
Flag Post

HP Stream-Blank Screen When Powering On

HP Recommended
****
Microsoft Windows 8.1 (32-bit)

I tried a number of different solutions from Google but haven't resolved the issue. When I turn the power on, the screen is blank, no noise and the only light is the Power light. The Caps Lock but was bkinking when I tries a Reset.

2 REPLIES 2
WAWood
Level 16
Level 16
34,049 26,486 3,092 6,659
Message 2 of 3
Flag Post
HP Recommended

@MissCH 

You can't do resets with the Stream models because the drives are too small to hold the working files needed.

 

Ordinarily, when a laptop no longer boots into Windows, this means that the boot records (known as the BCD) have become corrupted due to a failing drive and running diagnostics confirms this to be the case. Folks then replace the laptop drive, use the HP Cloud Recovery option and a 32GB USB stick to make recovery media, boot their laptop from that media and do a full restore.

With a Stream, this is a much more difficult situation.

First, the Stream does not actually have a laptop hard drive. Instead, it has a memory stick configured to work like a "disk drive" -- so, it has a stick of EMMC memory instead of an HDD. This is very small, usually 32GB, so it is too small to do any major Windows Updates since Windows takes up nearly all of the "drive".

Second, the SSD, unlike the SATA SSDs in other laptops, can not be replaced by the consumer. So, when it fills up, you can't replace it with a larger one. And when it fails, you can't replace it with a new one.

Thus, you can try running diagnostics to test the drive -- but if it fails, you will have to take the Stream to a laptop repair facility to have them replace the SSD. You can not replace it yourself.

To check the drive you have to follow these steps:
1) Press Esc key repeatedly, several times a second, while rebooting the laptop. Do NOT hold the key down, just press it over and over.
2) Eventually, you will see an HP Startup Menu
3) Press the Function key for testing the hard drive (usually F2) and let it run.

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
Was this reply helpful? Yes No
MissCH
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Good morning,  I will try that and thank you!

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation