HP Stream stuck on automatic repair

[Deanno7]

the laptop startsup with automatic repair but says it did not start correctly and wont accept any of the repair options. 

[Echo_Lake]

@Deanno7

Thank you for posting on the HP Support Community.

• Did this happen after a recent window or software update?
• Have you made any hardware/software changes?
• Have you tried any troubleshooting steps?

While you respond to that, let's try these steps: 

Firstly, run Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8 

Next step, BIOS default: 

1. Turn off the computer and wait five seconds.
2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4. Press F10 to Save and Exit.
5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6. Follow the prompts to restart your computer.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.