cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
fdx3k1
New member
2 1 0 0
Message 1 of 3
195
Flag Post

HP x2 10t-p000 boots into BIOS and has "Exit Discarding Changes" flashing on the screen

HP Recommended
10t-p000
Microsoft Windows 10 (64-bit)

System was working fine and then suddenly wouldn't boot.  Cleared the BIOS and it started working.  Rebooted and now it instantly goes into F10 (BIOS) when you power on, don't even get an HP screen.  Once in the BIOS, it has the "Exit Discarding Changes" box flashing on the screen.  You can hit enter and it reboots to do the same thing.  Was fast enough to arrow over to No and hit enter, but it just comes back.  Any ideas?  

2 REPLIES 2
fdx3k1
Author
New member
2 1 0 0
Message 2 of 3
Flag Post
HP Recommended

And I did disconnect the main battery and cmos battery for 30 minutes to try and reset it.  It gave me the checksum error and had me hit enter to reboot.  Came up and did the same thing.

Was this reply helpful? Yes No
praveenbv
HP Support Agent
HP Support Agent
7,672 7,670 337 429
Message 3 of 3
Flag Post
HP Recommended

Hi@fdx3k1, Welcome to the HP Support Community!

 

I understand when you power on your laptop the screen keeps flickering on your laptop.

 

Don't worry I'll try to help you out.

 

Did you make any software or hardware changes on your PC?

 

Does the issue persist in BIOS?

 

As you mentioned when you power on your laptop the screen keeps flickering on your laptop.

 

If the issue does not persist in BIOS try updating the graphics driver and BIOS on your PC.

 

Try performing a BIOS default on your PC and check if it helps.

  1. Turn off the computer and wait five seconds.
  2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
  3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
  4. Press F10 to Save and Exit.
  5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
  6. Follow the prompts to restart your computer.

 

Also, Uninstall the graphics driver from the device manager and install the latest drivers and BIOS from the links below.

 

Link to update the BIOS.

 

Also, update the graphics driver using this link.

 

You can try updating the drivers on your PC using an HP support assistant.

 

Refer to this article to know more information about using HP support assistants.

 

Refer to this article to further troubleshoot display issues with your PC.

 

If the screen is flickering in BIOS, it is certainly a hardware issue with your PC.

             

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation