-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- Master MDT - WDS / HP 470 G8 / RST Issue - with solution

Create an account on the HP Community to personalize your profile and ask a question
07-11-2022 05:58 AM
I have the same issue as Pierre_CHEVANNE in this topic. Short recap in my situation:
I'm trying to use MDT - WDS to deploy master version of Windows 10 onto the HP 470 G8 Notebook PC. Downloaded all drivers and we get a BSOD after first reboot during MDT with the error "INACCESSIBLE BOOT DEVICE".
I have injected last HP WINPE Drivers on my boot image and raplace it, still the issue.
I tried to boot on usb key to install a fresh LTSC install, and i've not hard disk detected at the install.
So i think that i've not the right Intel RST driver to detect the hard drive.
I tried download it on HP SUPPORT Website on the model page, same issue.
In the bios settings i've nothing to configure in relation with RAID, AHCI...
Then finally, I went ahead and went to the Intel website and downloaded the latest Intel® Rapid Storage Technology Driver Installation Software with Intel® Optane™ Memory (11th and 12... and injected this in the WINPE Drivers and Out-of-the-Box Drivers for driver injection and this worked.
There is a difference with the driver downloaded from the HP page, which is the iaStorAC.inf 17.11.0.1000 and the one downloaded from the Intel page, which is iaStorVD.info 19.2.0.1003. HP: can you update your drivers so it reflects the correct driver? Thanks.