cancel
Showing results for 
Search instead for 
Did you mean: 
I_Vaibhav
New member
3 1 0 0
Message 1 of 3
156
Flag Post
HP Recommended

Solved!

My laptop display harddisk1 (301) error and display smart check failure etc

15 r264dx
Microsoft Windows 10 (64-bit)

When I see this I diagnosed it and it was failed and display 24 digit code. Plz tell me what happened with it. If it is hard disk issue then my data will be recovered or not and how it will be recovered.

2 REPLIES 2
Level 15
Level 15
9,839 9,788 1,923 3,690
Message 2 of 3
147
Flag Post
HP Recommended

Solved!

My laptop display harddisk1 (301) error and display smart check failure etc

Hi,

You will need to replace the hard drive. You can try to recover your data once you have removed the drive by using a USB to SATA adapter cable.

Example:

https://www.amazon.com/StarTech-com-SATA-Drive-Adapter-Cable/dp/B00HJZJI84/ref=sr_1_3?ie=UTF8&qid=15...

 

For the drive:

So what you need is a 2.5" SATA3 hard drive (max 2TB because of the thickness of drive). You can get from your preferred brand such as Seagate, WD...

Example:

https://www.amazon.com/Seagate-Barracuda-2-5-Inch-Internal-ST2000LM015/dp/B01LYNQXCP/ref=sr_1_4?ie=U...

 

or you could opt for a 2.5" SATA3 SSD which would improve the everyday performance of the PC

Example:

https://www.amazon.com/Samsung-Inch-Internal-MZ-76E1T0B-AM/dp/B0781Z7Y3S/ref=sr_1_1?s=electronics&ie...

 

On page 59 of the service manual you can see the steps to replace drive:

http://h10032.www1.hp.com/ctg/Manual/c04409502

 

You will need to reinstall the OS on the drive, either by using recovery disks, migrating a backup image or by downloading media creation tool from Microsoft on different PC running and creating a bootable pendrive with the OS on it on a different computer. (there is an explanation on the Microsoft web page on how to create the pendrive) Windows will automatically activate once installed and connected to the Internet.

https://www.microsoft.com/en-us/software-download/windows10

 

If you choose this option you will need to use the pendrive to perform a clean install of Windows 10. You might need to disable fastboot and secure boot in BIOS (probably not). So, insert the pendrive in the PC and it should boot directly from the drive. If not, turn off PC by holding the power button. Press the power button and immediately keep pressing ESC  until startup menu appears and then press F9 and choose the pendrive in the boot menu. Once it boots from pendrive follow the procedure to install Windows. You do not need a product key as it is in the firmware.

 

When finished installing allow Windows to completely update and find all or most drivers. You can follow this process by going into settings > Security and update > click on Verify for updates. You might need to reboot a couple of times. Once completely updated you can go into device manager and see if there are any missing drivers (there will be yellow exclamation mark next to the device). You can find these drivers and software on HP support page for your product.

https://support.hp.com/us-en/product/hp-15-r200-touchsmart-notebook-pc-series/7486453/model/7791824/...

 

 I recommend installing HP support assistant which will help to keep drivers up to date and much more. Here you can download the latest version

https://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html

 

Let me know if you need further help,

David

 

Please click on thumbs up for thanks

Please click on accept as solution if answered your question

0 Kudos
Highlighted
I_Vaibhav
New member
3 1 0 0
Message 3 of 3
109
Flag Post
HP Recommended

Solved!

My laptop display harddisk1 (301) error and display smart check failure etc

Thanks allot u cleared my all confusion.

Now I know which step I have to take

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation