• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines

Featured blog article:

HP Recommended
HP ENVY x360 - 15m-ds0011dx

TL;DR: My laptop refuses to fully shut down on Windows 11.

 

The screen goes black and Windows seems to halt, but the power LED stays on, fans keep spinning, and the laptop stays warm until I hold the power button for 10 seconds.

Extensive hardware diagnostics (RAM isolation, SSD scans) show 100% healthy hardware.

I am on the latest BIOS (F.29).

Seeking help identifying if this is an unfixable Windows 11 ACPI/driver incompatibility, or if there's a known driver fix.

 

Device Specifications:

  • Model: HP ENVY x360 15m-ds0011dx (15m-ds0xxx family)

  • Product Number: 5TV95UA#ABA

  • OS: Windows 11, version 26H2 (OS Build 26300.9711) - Aware this model was built for Windows 10

  • BIOS: AMI F.29 (Oct/Nov 2023) - Confirmed latest via HP Support site

  • RAM: 20 GB (16GB Kingston + 4GB Hynix)

The Symptoms:

  • When I click "Shut down", Windows appears to close normally.

  • Event Viewer logs the full sequence (Event 1074, 109, and 13).

  • The screen goes completely black.

  • The keyboard backlight turns off and Caps Lock becomes unresponsive.

  • The Problem: The Power LED remains solid white, and the internal fan continues to spin. The laptop will stay in this "zombie" state indefinitely until the battery drains.

  • I have to hold the power button for 10 seconds to force it off.

  • Note: "Restart" works perfectly fine.

Diagnostics & Troubleshooting Already Performed:

  1. Fast Startup: Disabled in Windows Power Options. No effect.

  2. RAM Isolation: Suspected a memory fault due to mismatched sticks. Tested booting and shutting down with just the 16GB stick, then just the 4GB stick. Issue persists in all configurations.

  3. Storage & OS Integrity:

    • Get-StorageReliabilityCounter shows 0 wear and 0 media errors.

    • chkdsk C: /scan found 0 bad sectors.

    • DISM /ScanHealth and sfc /scannow passed perfectly.

  4. Crash Dumps: Previously caught a few 0x1A MEMORY_MANAGEMENT (parameter 0x3F) minidumps when the laptop silently crashed during sleep/idle, pointing to page file CRC errors, but physical SSD and RAM tests pass completely.

My Questions for the Community:

  1. Has anyone experienced this specific failure  after upgrading to Windows 11?

  2. Are there specific older Windows 10 AMD Chipset drivers, Realtek drivers, or Intel Management Engine drivers that I should force-install to fix the shutdown hang?

  3. Is this a known limitation of running Win 11 on this specific HP firmware?

Any insights or advanced driver troubleshooting steps would be greatly appreciated!

3 REPLIES 3
HP Recommended

Hi @vs_494 

 

Welcome to the HP Support Community! We're here to help you get back up and running.

 

Thank you for documenting the shutdown behavior and the troubleshooting already completed. We understand that the HP ENVY x360 15m-ds0011dx reaches a black screen during shutdown, but the power LED and fan remain active indefinitely, while Restart completes normally.

 

Given the detailed testing already performed, the next useful step is to focus on the Windows power-management and platform-driver path rather than repeating memory, storage, DISM, or SFC diagnostics.

 

Before recommending an older Windows 10 chipset or device driver, please share the following from Device Manager:

  • Under System devices, are any devices showing a yellow warning symbol or listed as an Unknown device?
  • Under System devices, please share the exact AMD-related entries shown, especially anything referring to GPIO, I2C, PCI, PSP, SMBus, or power management.
  • Under Network adapters, please share the exact Realtek/WLAN adapter model and currently installed driver version.
  • Confirm whether Settings > Windows Update > Advanced options > Optional updates currently offers any HP, AMD, Realtek, or firmware drivers.
  • If available, please also share the result of running powercfg /a from an Administrator Command Prompt. This will show the sleep/power states currently exposed by the firmware to Windows.

 

We would not recommend force-installing Intel Management Engine drivers. This ENVY x360 configuration is an AMD-based platform, so installing unrelated Intel platform-management components would not be an appropriate troubleshooting path.

 

The distinction between Restart working correctly and Shut down leaving the system powered is particularly useful. It suggests that Windows is reaching very late in the shutdown sequence and that the issue may involve the final ACPI/platform power transition rather than the initial Windows shutdown process.

 

The earlier 0x1A MEMORY_MANAGEMENT events should also remain part of the investigation even though the hardware diagnostics passed. They may be separate from the shutdown symptom, so we would avoid assuming that they establish a physical RAM or SSD failure.

 

Once the Device Manager details, driver versions, and powercfg /a output are available, we can compare the installed platform components and determine which HP-provided driver path is appropriate for the HP ENVY x360 15m-ds0011dx (5TV95UA#ABA) rather than installing older chipset or Realtek packages experimentally.

 

Take care, and have an amazing day!

 

Regards, 

Hawks_Eye

I'm an HP Employee.


If this reply helped resolve your issue, please select the Accept as Solution as it helps others in the community quickly find the answer they’re looking for.


And if you found this reply helpful, clicking Yes below is a great way to let us know we’re providing the support you need, as it encourages us to keep improving and sharing helpful guidance.

HP Recommended

Thank you @Hawks_Eye for the detailed reply and support.


Please see the Device Manager Inventory file & the powercfg/ a report attached.

Device Manager:

  • Warning Symbols: None. No unknown or errored devices are listed.

  • AMD Platform Entries:

    • AMD Audio CoProcessor (dated March 2026)

    • AMD PSP 10.0 (dated March 2020)

    • AMD GPIO Controller (dated March 2020)

    • AMD I2C Controller (dated April 2020)

    • AMD Micro PEP (dated Dec 2019)

    • AMD SMBus (dated March 2020).

  • Network Adapters:

    • Realtek RTL8822BE 802.11ac PCIe Adapter (v2024.0.10.220, dated Oct 5, 2020)

    • Realtek Bluetooth 4.2 Adapter (v1.8.1030.3010, dated Sept 8, 2020).

Optional Updates: No optional HP, AMD, or Realtek driver updates are currently pending in Settings.

 

Powercfg /a Output: Confirms Standby (S0 Low Power Idle) is enabled, with S1, S2, and S3 disabled. Fast Startup is disabled by system policy.

 

 

Thanks,

Vaibhav

HP Recommended

Hi @vs_494 

 

Thank you for sharing the Device Manager inventory and powercfg /a results.

 

The information helps narrow this down further. Since Device Manager is clean and the AMD platform devices are enumerating normally, we would not recommend force-installing Intel Management Engine drivers or experimenting with unrelated Realtek packages.

 

There is also an important support consideration with this model. The official HP driver page for the HP ENVY x360 15m-ds0011dx currently lists Windows 10 driver packages, rather than a Windows 11 driver set. HP advises using Windows Update for Windows 11 systems when Windows 11 drivers are not available for the model on the HP support site.

 

Your powercfg /a result is especially useful. With S0 Low Power Idle available and S1/S2/S3 unavailable, combined with Restart working normally but Shut down stopping after the display, keyboard, and Windows session have already switched off, the remaining behavior is consistent with the final platform power-off transition not completing.

 

Before changing individual AMD drivers, I suggest one targeted test:

  1. Open Command Prompt as Administrator.
  2. Run: shutdown /s /f /t 0
  3. Check whether the notebook completely powers off.

 

If it still reaches the same black-screen state with the fan and power LED remaining on, that would further separate the symptom from the normal Windows Start-menu shutdown path.

 

I would also avoid manually replacing AMD PSP, GPIO, I2C, Micro PEP, or SMBus drivers simply because their dates are older. Driver dates alone do not indicate that those packages are incorrect, and HP specifically cautions that alternative drivers from outside the supported driver path might work but are not supported by HP.

 

Given that the official HP ENVY x360 15m-ds0011dx driver page presently exposes Windows 10 rather than Windows 11 as the supported driver selection, I would not characterize this yet as a defective component or as a confirmed firmware limitation. The cleanest comparison, if practical, would be testing shutdown under HP's supported Windows 10 software environment. If shutdown completes there, that would provide much stronger evidence that the behavior is related to the Windows 11 platform/driver power-management path rather than the RAM, SSD, or basic hardware.

 

Regards,
Hawks_Eye

I'm an HP Employee.


If this reply helped resolve your issue, please select the Accept as Solution as it helps others in the community quickly find the answer they’re looking for.


And if you found this reply helpful, clicking Yes below is a great way to let us know we’re providing the support you need, as it encourages us to keep improving and sharing helpful guidance.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->