cancel
Showing results for 
Search instead for 
Did you mean: 
Jawad-123
New member
1 0 0 0
Message 1 of 2
89
Flag Post
HP Recommended

Power button isn't working

Hp probook 450 8th gen core i7
Microsoft Windows 10 (64-bit)

Hello, the power button of my laptop is not working, there is no sign of light around except a small light bulb next to charging. I was working on it and then shut it down I try to start it after some while but wasn't working at all. Please help me out. 

1 REPLY 1
Level 11
5,314 5,291 223 475
Message 2 of 2
46
Flag Post
HP Recommended

Power button isn't working

This will not work for everyone, but you may be lucky?


HP Notebooks and Mobile Workstations -
No Power, No Boot, No Display When Power Button Is Pressed



NOTE: Be sure the battery is installed in the computer and it has sufficient power before continuing. Due to the design of the Embedded Controller/Keyboard Controller, the power supply must be disconnected and the computer must be powered with battery power to reset the Embedded Controller/Keyboard Controller.

Unplug the AC power from the computer.
Press and hold the power button for more than 12 seconds.
Release the power button (after at least 12 seconds).
The computer will power on and should boot normally after releasing the power button.
Re-connect the AC power to the computer.

NOTE: In case the battery is not charging after performing the steps to reset the Embedded Controller, unplug and re-plug in the AC power again.

 

Little Boy Blue, come blow your horn.


Lil_Boy_Blue
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation