cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Kaibloune
New member
1 0 0 0
Message 1 of 2
309
Flag Post

automatic repair loop

HP Recommended
Hp m6 envy
Microsoft Windows 10 (64-bit)

PLEASE HELP! My hp windows laptop is stuck in an Automatic Repair loop. I tried restarting it and everything in the troubleshooting area. It won't work. I desperately need this laptop. If you can help, please contact my **bleep**  [Personal Information Removed]

 

 

 

 

1 REPLY 1
WAWood
Level 16
Level 16
34,852 24,531 3,145 7,830
Message 2 of 2
Flag Post
HP Recommended

@Kaibloune 

Unfortunately, this message nearly always means that a recent Windows Update failed and Microsoft then tried to recover from that, but that failed, so it's trying over and over again -- and will never succeed because Windows Update got corrupted in the process. Unfortunately, this is NOT a new issue with Win10 Windows Updates.

This problem is very difficult, if not impossible to fix -- from the standpoint of making repairs and leaving your stuff intact. Some steps for trying this are listed below, but they are very hard to do and if they do not work, you are faced with doing a complete Windows reinstallation to get your PC back working again.

And if that is the case, you need to come back here and tell us what failed so we can provide instructions for things you can to do retrieve some data from your drive before you do a complete reinstallation.
----------

First thing you need to do is see if you can restart in Safe mode -- by doing these steps: https://www.tenforums.com/tutorials/2304-boot-into-safe-mode-windows-10-a.html

If you don't know how to start using Advanced Startup Options, then read this: https://www.tenforums.com/tutorials/2294-boot-advanced-startup-options-windows-10-a.html

Then, follow these steps to reset Windows Update: https://www.tenforums.com/tutorials/24742-reset-windows-update-windows-10-a.html

If these work, when you finally reboot, you should then be able to login to a working Windows desktop.

If these don't work, then report that back here as we will then have to provide you information on reinstalling Windows.



I am a volunteer and I do not work for, nor represent, HP
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation