laptop got switch off suddenly in ON condition wheen connected charger and now it is not starting

[swapnil-nemade]

Model no - 15-CS1000tx

[swapnil-nemade]

Laptop not able to start on battery or on power supply.  Even charging light is also not glowing. 

[Echo_Lake]

@swapnil-nemade

Thank you for posting on the HP Support Community.

Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details:

• Did this happen after a recent window or software update?
• Did you try another charger?
• Does the notebook shut down immediately (right after you unplug the charger)?
• Do you get any error message on your notebook (Such as Plugged in, not charging, etc.)?

While you respond to that, let's try these steps: 

Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8. (do not skip any troubleshooting steps even if you feel steps are repeating)

BIOS default: 

1. Turn off the computer and wait five seconds.
2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4. Press F10 to Save and Exit.
5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6. Follow the prompts to restart your computer. If the issue persists, follow next steps.

Run hardware diagnostics test on battery and Charger:

Use the following steps to open the Component Tests menu.

1. Hold the power button for at least five seconds to turn off the computer.
2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3. On the main menu, click Component Tests.
4. The Component Tests menu displays. Your Component Tests menu might be different, depending on the components installed on your computer.
5. To run both tests simultaneously, in the Component Tests menu, click Power Source, and then click Run once. Each component can also be tested individually.

AC Adapter Test:

The AC Adapter test provides an interactive test to determine if the AC power adapter is functioning properly. A good battery is required for this test. Before running the AC Adapter Test, HP recommends verifying that your computer can receive power by connecting a known working AC adapter.

Follow these steps to perform the AC Adapter Test.

• In the Component Tests menu, click Power, and then click an AC Adapter Test.
• Click Run once.
• The AC Adapter Test begins.
• When the test is complete, the results are displayed on the screen.

Battery Test:

Follow these steps to perform the Battery Test:

1. In the Component Tests menu, click Power, and then click Battery.
2. Click Run once. The Battery Test begins.
3. When the battery test is complete, the results are displayed on the screen. For additional battery information, click Battery Details.

If the test passes, continue with these steps:

1. Go to Start, search for Device Manager, and open this result.

2. Expand batteries.

3. Right-click on the ACPI option (usually the 2nd option) and select delete or uninstall. Follow the prompts.

4. Shut down the computer. 

5. Disconnect the charger.

6. Remove the battery.

7. Hold down the power button for 1 minute.

8. Insert the battery only.

9. Attempt to turn the battery on.

• If possible, try an alternate charger.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

[swapnil-nemade]

notebook shut down immediately (right after i plug the charger)?

Also not able to switch ON charger Notebook on charger or battery. 

I am using my original charger only. 

[swapnil-nemade]

I did not got any error on laptop.  Suddenly switch off in running condition

[Echo_Lake]

@swapnil-nemade

Thank you for posting back.

Let's try this:

1. In Windows, search for and open Control Panel.

2. Search for power, and then click Power Options.

   

3. Select an option under Choose or customize a power plan.

   

4. To customize the selected plan, click Change plan settings, and then select the display and sleep settings when using the battery and when plugged in.

   NOTE: To set up a personalized plan, click Create a power plan from list on the left side of the main Power Options window, and then follow the on-screen instructions. The plan displays in the list of available power plans.

5. To change more power settings, click Change advanced power settings.

   

6. Click the plus sign next to the component or function, change the available settings, click Apply, and then click OK.

   

7. Click Save changes.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.