Хочу включить вкладку SECURE BOOT в BIOS но вкладка почему-то горит серым и не даёт себя включить

[stepandnsk]

Хочу включить вкладку SECURE BOOT в BIOS но вкладка почему-то горит серым и не даёт себя включить

[Paul_Tikkanen · Accepted solution]

If Windows is installed in UEFI mode, see if this works to enable secure boot:

Step 1. Go into the BIOS and Load HP Factory Default Keys and see if Secure Boot becomes available.

Step 2. If it does not than go into the operating system and disable “Fast Boot” (Steps below).

How to Disable Windows 10 Fast Startup (lifewire.com)

Step 3. go back into your BIOS and try Load HP Factory Default Keys.

Step 4. enable Secure Boot at this point.

You can tell if Windows is installed in UEFI mode by running the Windows system information app.

Check the BIOS Mode line.  It should be on UEFI.

If it is on Legacy, you will need to convert the drive to GPT so you can enable secure boot.

[stepandnsk]

Помогло больше спасибо!)

[Paul_Tikkanen]

You're very welcome.