Apparently HD is messed up, I have a failure code...

[jabwocky]

Failure ID code is: PTTQX0-8T69KL-GXGGQK-60SD03
This is on a neighbors laptop, is it toast??
I would appreciate a little help.

Thanks
BTW, it's out of warranty, just recently too...

[jabwocky]

It also says Product ID 1KV34UA#ABA if that helps

[iomare · Accepted solution]

Hi,

The failure id indicates that the hard drive has failed the quick test and needs to be replaced. Here is a small guide:

So what you need is a 2.5" SATA3 hard drive (max 2TB because of the thickness of drive). You can get from your preferred brand such as Seagate, WD...

Example:

https://www.amazon.com/Seagate-Barracuda-2-5-Inch-Internal-ST2000LM015/dp/B01LYNQXCP/ref=sr_1_4?ie=U...

or you could opt for a 2.5" SATA3 SSD which would improve the everyday performance of the PC

Example:

https://www.amazon.com/Samsung-Inch-Internal-MZ-76E1T0B-AM/dp/B0781Z7Y3S/ref=sr_1_1?s=electronics&ie...

On page 43 of the service manual you can see the steps to replace drive:

http://h10032.www1.hp.com/ctg/Manual/c05963248

You will need to reinstall the OS on the drive, either by using recovery disks, migrating a backup image or by downloading media creation tool from Microsoft on different PC running and creating a bootable pendrive with the OS on it on a different computer. (there is an explanation on the Microsoft web page on how to create the pendrive) Windows will automatically activate once installed and connected to the Internet.

https://www.microsoft.com/en-us/software-download/windows10

If you choose this option you will need to use the pendrive to perform a clean install of Windows 10. You might need to disable fastboot and secure boot in BIOS (probably not). So, insert the pendrive in the PC and it should boot directly from the drive. If not, turn off the PC by holding the power button. Press the power button and immediately keep pressing ESC  until the startup menu appears and then press F9 and choose the pendrive in the boot menu. Once it boots from pendrive follow the procedure to install Windows.

When finished installing allow Windows to completely update and find all or most drivers. You can follow this process by going into settings > Security and update > click on Verify for updates. You might need to reboot a couple of times. Once completely updated you can go into device manager and see if there are any missing drivers (there will be yellow exclamation mark next to the device). You can find these drivers and software on the HP support page for your product.

https://support.hp.com/us-en/product/hp-17-bs000-laptop-pc/15551424/model/16778713/manuals?sku=1KV34...

 I recommend installing HP support assistant which will help to keep drivers up to date and much more. Here you can download latest version

https://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html

Hope it helps,

David

Please click on thumbs up for thanks

Please click on accept as solution if answered your question