BIOS of HP laptop not working

[Faresoyam]

I tried to use bios recovery it started then after the verifying is complete it say the screen may blink for several minutes or so and it stucked here what I can do, the problem started when I tried to update bios to the last update

[Lil_Boy_Blue]

Hi

https://support.hp.com/us-en/document/c02693833

[Faresoyam]

I created bios recovery and it installed but even so it didn't work

[Lil_Boy_Blue]

Hi

This is the problem.....

""I tried to use bios recovery it started then after the verifying is complete it say the screen may blink for several minutes or so and it stucked here what I can do, the problem started when I tried to update bios to the last update""

Did you first do a BIOS update to the Latest Version?  YES/NO

Did it work/complete?  YES/NO

Why then try/attempt a BIOS Recovery?

[Faresoyam]

1- Yes, I done BIOS update to the latest version 

2- No, It didn't work, after the verifying  completed it started rebooting, after half an hour I lost hope, and i turned it off

3- I tried to do BIOS recovery because the laptop keeps rebooting ,but it didn't work

[Lil_Boy_Blue]

Read thru the link.

[Lil_Boy_Blue]

https://support.hp.com/us-en/document/c02693833

[Faresoyam]

I have this problem The computer stops at a black or blank screen when powered on. The BIOS Setup Utility, Hardware Diagnostic Tools, or System Recovery are not accessible.

[Lil_Boy_Blue]

Hi

So it is not known what the fault is, only thet it shows a black screen?  It may be GPU or BIOS or RAM or......

https://www.theregister.co.uk/2019/02/04/microsoft_windows_update_woes/

The BIOS recovery involves holding down the WINDOWS and B (V) key  BEFORE applying power for 2 - 3 seconds.
Press and hold the Windows key and the B key at the same time, and then press and hold the power button for 2 to 3 seconds.
Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.
The HP BIOS Update screen displays and the recovery begins automatically. Follow any on-screen prompts to continue the startup to complete the recovery.
HP BIOS Update recovery in progress

If the HP BIOS Update screen does not display, repeat the previous steps but press the Windows key and the V key. If the screen still does not display, your computer might not support the feature or there is a hard drive issue. Continue to the next step to install a BIOS recovery file from the HP website.
If the Power light turns off, the Power button was held too long. Repeat the previous steps, making sure to hold the button for only 2 to 3 seconds.

AND/OR only have the original RAM installed.  Remove any SSD devices.