Bios update brick my pc

[Agomez36]

Hello!

Im here because I need ur help

Recently i turned on my notebook and this start a bios update, everythin good but when I tried to turn on my computer again nothing happens, I tried to recover my bios with windows + b and usb but not work, please help

The led of the power button turn on for 10 second and then turn off

Video

https://youtu.be/fyoGmIoi7Wo

[sandytechy20]

@Agomez36

Welcome to the HP support community.

Try restoring the BIOS to default on your PC and check if it helps.

1.    Turn off the computer and wait five seconds.
2.    Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3.    On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4.    Press F10 to Save and Exit.
5.    Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6.    Follow the prompts to restart your computer.
 

To perform a power reset on a laptop with a removable battery, use the following steps:
Turn off the computer.
Remove the computer from any port replicator or docking station.
Disconnect all external connected peripheral devices such as USB storage devices, external displays, and printers.
Unplug the AC adapter from the computer.
Remove the battery from the battery compartment.
With the battery and power cord unplugged, press and hold the Power button for about 15 seconds to drain any residual electrical charge from the capacitors.
Insert the battery and plug the AC adapter back into the laptop, but do not connect any of the peripheral devices.
Press the Power button to turn on the computer.
If a startup menu opens, use the arrow keys to select Start Windows Normally, and then press the Enter key.
After Windows opens, reconnect each peripheral device that was disconnected, one device at a time, until all devices are reconnected.
Your laptop has been reset. After a power reset, it is a good idea to run Windows Update and HP Support Assistant to update all device drivers. See Updating Drivers and Software with Windows Update Windows and Using HP Support Assistant (Windows 10, 8, 7) for more information.

Refer the video instuctions from HP support to know more information about performing a recovery using USB. Click Here

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.