Bios update stuck at Erasing and writing+Keyboard /mouse not working

[drv10]

I was updating bios so my internal keyboard works ,after updating all drivers,using external keyboard now update is stuck at Erasing and writing on InsydeFlash, I can use my keyboard and mouse please help.its stuck for half hour now

[A4Apollo]

Hi! @drv10, Welcome to HP forums.

I understand the laptop is stuck at Erasing and rewriting the BIOS on your PC.

Don't worry I'd like to help you out.

Did you make any software or hardware changes on your PC?

Please try the steps recommended below.

Turn off the notebook.
Plug the notebook into a power source using the power adapter.
With the notebook off, press and hold the Windows logo key and the B key at the same time.
   NOTE:
On some notebook models, it might be necessary to press and hold the Windows logo key and the V key.
While pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows logo key and the B or V key until the HP BIOS update screen displays or you hear a beeping sound (usually 8 beeps).
The HP BIOS Update screen displays and the BIOS update begins automatically. This might take several minutes, and you might hear additional beeping sounds.
If the HP BIOS Update screen does not display, repeat the previous steps. If the issue persists after repeating the steps, skip to the next step to Download a replacement BIOS file.
If the Power light turns off, the notebook has turned off because the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for 2 to 3 seconds only.
If your notebook starts Windows, update the BIOS to the latest version using the standard BIOS update procedure. For more information about updating your notebook BIOS, go to Updating the BIOS (Notebooks).
Click Continue Startup to prompt the notebook to restart immediately, or allow the notebook to restart automatically when the timer reaches zero.
After the notebook restarts, press Enter to continue.
   NOTE:
If the notebook repeatedly displays a message that the BIOS has been recovered, go to HP BIOS Application Selected is Corrupt or Missing for troubleshooting steps.
After Windows starts, if a message displays stating that the notebook was improperly shut down or that a boot problem was detected, follow the on-screen instructions.
You can now to enter the BIOS menu or start the Windows operating system.

Refer this article to further troubleshoot recovering the BIOS on your PC.

I'll watch your reply!

Have a great day! 🙂

Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.

Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!