• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP Probook 6460b
Hi! I wanted to install a new windows and for that i created a bootable usb. And in the installation process i "Cleaned" my hard disk using command prompt. After that when I power on my laptop with bootable usb, it shows an error "BootDevice not Found, Please install operating system"!
Please Help me!
I am very helpless what to do now???
1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@official_mhm13 wrote:
Hi! I wanted to install a new windows and for that i created a bootable usb. And in the installation process i "Cleaned" my hard disk using command prompt. After that when I power on my laptop with bootable usb, it shows an error "BootDevice not Found, Please install operating system"!
Please Help me!
I am very helpless what to do now???

Hi,

 

In order to be sure we are on the same page, please confirm which commands you used to "clean" your hard disk drive. Do you mean the Diskpartk clean option as described here >> http://knowledge.seagate.com/articles/en_US/FAQ/005929en

 

If you erased all of the content on a drive, this is normal to have a boot device not found when powering on your computer. You will need to manually boot from the bootable media (unless you somehow cleaned it, too).

 

Insert the bootable device, keep pressing the Esc button during power-on to start the HP Boot menu

Then, once it opens press F9 for bootable options and select your bootable media.

 

You may also check this >> https://www.youtube.com/watch?v=UULOkJAjcts

 

 

Your FEEDBACK is important. Use the interactive buttons below and let me know if the post helps ;
*** HP employee *** I express personal opinion only *** Joined the Community in 2013

View solution in original post

1 REPLY 1
HP Recommended

@official_mhm13 wrote:
Hi! I wanted to install a new windows and for that i created a bootable usb. And in the installation process i "Cleaned" my hard disk using command prompt. After that when I power on my laptop with bootable usb, it shows an error "BootDevice not Found, Please install operating system"!
Please Help me!
I am very helpless what to do now???

Hi,

 

In order to be sure we are on the same page, please confirm which commands you used to "clean" your hard disk drive. Do you mean the Diskpartk clean option as described here >> http://knowledge.seagate.com/articles/en_US/FAQ/005929en

 

If you erased all of the content on a drive, this is normal to have a boot device not found when powering on your computer. You will need to manually boot from the bootable media (unless you somehow cleaned it, too).

 

Insert the bootable device, keep pressing the Esc button during power-on to start the HP Boot menu

Then, once it opens press F9 for bootable options and select your bootable media.

 

You may also check this >> https://www.youtube.com/watch?v=UULOkJAjcts

 

 

Your FEEDBACK is important. Use the interactive buttons below and let me know if the post helps ;
*** HP employee *** I express personal opinion only *** Joined the Community in 2013
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.