Giving Error 0130-abg-acj and displays as computer not supported by system recovery media

[AnkitR17]

While loading computer with hp provided recovery dvds of Windows 8, the error is coming as Error 0130-abg-acj saying that "the computer is not supported by the system media. You will not be able to  continue to recover with these media. " and while just switching on it is displaying no Operation system. How to complete the recovery with the dvd...? 

[Riddle_Decipher]

@AnkitR17 Here's a related post that may help your cause: click here to view,

That said, here's what you need to know about the error starting with 0130:

This error displays when the recovery media is for a different language or system localization.

For example: Imaging fails if you try to install a US recovery image (ABB) on a Canadian system (ABL), because the US recovery media only includes an English image while a

• Canadian system use a recovery image that includes both French and English options.
• Error type = Localization code in BIOS
• Supported localization code in SSRD / UCRD
• 0130 | ABL | ABB

These errors can occur due to the following conditions:

• Using the wrong recovery discs, such as those that you created or ordered for another computer.

• The configuration data on the motherboard or hard drive was not correctly configured at the factory when the computer was manufactured.

• The motherboard on your computer was replaced with a motherboard that is not the same replacement part. If so, you must install a new operating system or replace the motherboard with the original type.

If this error opens and you are using discs that were ordered from HP or that HP Support sent, find out if you have the correct recovery discs (that HP sent) using the following steps:

1. Get the software build number for your computer:

   • On the Start screen, click the Desktop tile. Look for the build number information on the lower, right corner of the Windows desktop.

   • If your computer cannot open Windows, you can find a software build number on a sticker found on the outside of the computer case.

2. Compare the software build number to the build number on the recovery discs.

   • If the software build number matches the number on your recovery discs and the recovery still fails with this error, HP needs to service the computer before you can recover it.

   • If the number on the recovery discs is not the same as the software build number, see the HP support document HP PCs - Obtaining HP Recovery Discs or an HP USB Recovery Drive. Make sure the numbers on the recovery disc do not match the software build number before ordering new discs.

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!