-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Hard Drive Failure ID

Create an account on the HP Community to personalize your profile and ask a question
04-23-2019 08:57 PM
When I start up my computer and black screen appear telling me that there is an error on the hard drive and that I should make a security copy and do a diagnostic test on the system.
it says “Hard Drive 1 (307)”
When I did the diagnostic test it says:
Hard Drive SMART check: FAILURE
FAILURE ID:MCXX9G-8B79KH-MFPX7F-609R03
PRODUCT ID: N5Y05UA#ABA
Hard Drive 1 - Primary HDD Bay*
I try to search information about the failure ID but i didnt found anything of how to fix it can someone help me please?
04-24-2019 08:26 AM
Hi:
The error code reported, Hard Disk 1 SMART Hard Drive Detects Imminent Failure, means the hard drive is about to fail, or has failed, needs to be replaced and the operating system reinstalled.
If you can still get into Windows, back up any files you need to save onto a portable hard drive. Then replace the hard drive.
Below is the link to the service manual for your notebook. The HDD R & R procedure can be found in chapter 6.
http://h10032.www1.hp.com/ctg/Manual/c04763947
After you replace the hard drive, you can reinstall W10 for free as follows...
You can make a W10 USB flash drive installer with the Microsoft Media Creation Tool, using an 8 GB flash drive using another Windows PC, if your PC is not working.
https://www.microsoft.com/en-us/software-download/windows10
If you are asked to enter a product key during the installation process, select the 'I don't have a product key' option, and W10 will install and automatically activate once you are connected to the internet.
Here are the steps to create the W10 USB flash drive installer...
Select Download tool now, and select Run.If you agree to the license terms, select Accept.
On the What do you want to do? page, select Create installation media for another PC, and then select Next.
Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10. You want 64 bit.Select which media you want to use:
USB flash drive. Plug in a blank USB flash drive with at least 8GB of space. Any content on the flash drive will be deleted.
Then you can reinstall the drivers and available software from the PC's support page.
https://support.hp.com/us-en/drivers/selfservice/hp-15-f200-notebook-pc-series/7527799/model/8888505