How to restore my WiFi connection

[tichy7]

HP EnvyPro 6458 Printer lost. WiFi connection

[Kuroi_Kenshi]

Hi @tichy7,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding your printer's connectivity!

We're thrilled to have the opportunity to assist you and provide a solution.

Try these steps:

For Printers with a Touchscreen Control Panel

• Place the printer near the network router.
• Ensure paper is loaded into the input tray.
• Turn on the printer.
• From the Wireless or Setup menu, select Network setup or Settings.
• Select Restore Network Settings.

Use Wireless Setup Wizard:

• From the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard.
• Select your network from the list, and enter the network password.

Print a Wireless Network Test Report:

• Open the Wireless, Network Settings, or Setup menu and print the Wireless Network Test report.
• Review the information and follow any instructions to troubleshoot connectivity issues.

For Printers without a Touchscreen Control Panel

Using Wi-Fi Protected Setup (WPS):

• Place the printer near the WiFi router.
• On the printer control panel, press and hold the Wireless button for 5 seconds until the light starts flashing.
• Within two minutes, press and hold the WPS button on the router until the connection process begins.

Using HP Smart app:

Restore Wi-Fi Setup Mode:

• Restore Wi-Fi setup mode on your printer using the buttons on the printer control panel. For detailed steps, refer to Restore Wi-Fi setup mode on your HP printer.

Install HP Smart app:

• Install the HP Smart app on your mobile device or computer. Then, use the HP Smart app to set up your printer on your network.

Using Printer Homepage:

Use Wi-Fi Direct Connection:

• Find the printer’s Wi-Fi Direct name and password.
• On your computer or mobile device, open the list of available wireless networks.
• Select the Wi-Fi Direct printer name from the list, and enter the password.

Access the Printer Homepage:

• In a web browser, type 192.168.223.1 into the address bar.
• If prompted to log in, enter admin for the username and the PIN from the printer label (usually located inside the cartridge access area or printer door).
• From the Network menu on the printer homepage, select Wireless (802.11), then select Wireless Setup Wizard.
• Follow the instructions to select your Wi-Fi network name and enter the password.

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,

[Kuroi_Kenshi]

Hi @tichy7,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding your printer's connectivity!

We're thrilled to have the opportunity to assist you and provide a solution.

Try these steps:

For Printers with a Touchscreen Control Panel

• Place the printer near the network router.
• Ensure paper is loaded into the input tray.
• Turn on the printer.
• From the Wireless or Setup menu, select Network setup or Settings.
• Select Restore Network Settings.

Use Wireless Setup Wizard:

• From the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard.
• Select your network from the list, and enter the network password.

For Printers without a Touchscreen Control Panel

Using Wi-Fi Protected Setup (WPS):

• Place the printer near the WiFi router.
• On the printer control panel, press and hold the Wireless button for 5 seconds until the light starts flashing.
• Within two minutes, press and hold the WPS button on the router until the connection process begins.

Using HP Smart app:

Restore Wi-Fi Setup Mode:

• Restore Wi-Fi setup mode on your printer using the buttons on the printer control panel. For detailed steps, refer to Restore Wi-Fi setup mode on your HP printer.

Install HP Smart app:

• Install the HP Smart app on your mobile device or computer. Then, use the HP Smart app to set up your printer on your network.

Using Printer Homepage:

Use Wi-Fi Direct Connection:

• Find the printer’s Wi-Fi Direct name and password.
• On your computer or mobile device, open the list of available wireless networks.
• Select the Wi-Fi Direct printer name from the list, and enter the password.

Access the Printer Homepage:

• In a web browser, type 192.168.223.1 into the address bar.
• If prompted to log in, enter admin for the username and the PIN from the printer label (usually located inside the cartridge access area or printer door).
• From the Network menu on the printer homepage, select Wireless (802.11), then select Wireless Setup Wizard.
• Follow the instructions to select your Wi-Fi network name and enter the password.

I hope this helps.

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,