• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP Laptop PC 15-dw3000 (31R08AV)
Microsoft Windows 11

Good Day, I recently installed a SSD on my HP 15-DW3030ni laptop,I have a mechanical HDD which came with the laptop with Windows 11 installed still connected and would like to install a fresh copy of WIn 11 on the SSD using the HP USB recovery tool,however when booting the USB using F9 I receive and error "Your Device/PC needs to be repaired,The application or operating system couldn't be loaded because a required file is missing or contains errors,File:\Windows\system32\boot\winload.efi Error Code:0xc0000225, I disabled secure boot but to no avail,followed HP video in using cloud recovery tool but still issue persists,cannot get to Win 11 installation from USB.PC boots normally with mechanical HDD.Please Help.Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Anytime, Abie.

 

Glad to have been assistance and that is good to know that you were able to make another recovery USB using another PC worked for you.

 

Cheers,

 

Paul

View solution in original post

5 REPLIES 5
HP Recommended

Hi:

 

Try clean installing W11 on the NVMe SSD.

 

Make a bootable W11 installation flash drive with the media creation tool from the link below (2nd option).

 

Download Windows 11 (microsoft.com)

 

When you get to the part of the installation that asks 'Where do you want to install Windows,' you will probably receive a message that states in substance that 'We cannot find any drives.'

 

You have to install the Intel storage controller drivers that I zipped up and attached below, which are good for PC's with the Intel 11th gen > 13th gen core processors.

 

Copy the 5 files from the F6/VMD/f6vmdflpy-x64 folder to a USB flash drive.

iastorvd.cat

iastorvd.inf

iastorvd.sys

rstmweventlogmsg.dll

rstmwservice.exe

 

Have the flash drive and your W11 installation media plugged into USB ports.

 

Boot from the W11 installation flash drive.

 

When you get to the screen where no drives can be found, click on the Load driver option, browse to the flash drive with the storage controller drivers on it.

 

If you check the box, it will only include the compatible driver.

 

Click Next, and Windows should find the drive and install.

 

HP Recommended

Hi 

Thanks for the reply,will follow procedure as per your solution.Will keep you posted.

 

Many Thanks

HP Recommended

You're very welcome.

HP Recommended

Good Day Paul,

 

I managed to do the install using the HP recovery USB boot disk,apparently the first cloud recovery USB that I used had a corrupted file system on it,remade a new USB boot disk on a different PC and Win 11 installed perfectly.

Thanks Once Again for all the help.

 

Kind Regards

 

Abie

 

HP Recommended

Anytime, Abie.

 

Glad to have been assistance and that is good to know that you were able to make another recovery USB using another PC worked for you.

 

Cheers,

 

Paul

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.