Laptop trouble

[Jamee84]

When I turn on my hp laptop with windows 10, it's says diagnosing your PC then goes to a blue screen with automatic repair and I click on advanced options and have tried every option available and it still goes right back to the same thing. Please help! 

[zoey7886]

@Jamee84, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding HP Laptop Stuck in Automatic Repair Loop! 

We're thrilled to have the opportunity to assist you and provide a solution.  

If your HP laptop with Windows 10 is stuck in an automatic repair loop, here are some steps you can take to try to resolve the issue:

Perform a Hard Reset:

• Shut down your laptop completely.
• Disconnect any external devices like printers, USB drives, etc.
• Remove the power adapter and, if possible, the battery.
• Press and hold the power button for about 15 seconds.
• Reconnect the power adapter and battery, then power on your laptop.

Use Safe Mode:

• Restart your laptop.
• As it starts, press the F8 key repeatedly until the Advanced Boot Options menu appears.
• Select Safe Mode with Networking to see if you can boot into Windows.

Run System Restore:

• In the Advanced Options menu, select System Restore.
• Choose a restore point dated before the issue started.
• Follow the prompts to restore your system.

Repair Windows Using Command Prompt:

• From the Advanced Options, select Command Prompt.
• Try repairing system files by typing the following commands:
  chkdsk /f /r
  sfc /scannow
• Restart your laptop after the commands are executed.

Disable Automatic Startup Repair:

• Open Command Prompt from the Advanced Options.
• Type bcdedit /set {default} recoveryenabled No and press Enter.
• Restart your computer.

Reset Your PC:

• Go to Advanced Options and select Troubleshoot.
• Choose Reset this PC and pick either Keep my files or Remove everything.

If these steps do not resolve the issue, you may need to consider reinstalling Windows 10  

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,