-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Laptop won’t turn on/doesn’t work

Create an account on the HP Community to personalize your profile and ask a question
11-21-2019 02:59 PM
My laptop was left leaning up against my wall heater for a solid day about a week ago. I just tried to plug it in and turn it on; nothing. I checked to see if the battery indicator lit up when plugged in; still nothing. Is there anything I can do to fix this or should I just get a new one at this point
Solved! Go to Solution.
Accepted Solutions
11-24-2019 11:02 AM
@kadenmclain Welcome to HP Community!
Perform the below steps:
If the computer does not start, the LED lights do not glow, and the display is black,
you can perform one or more of the following actions to resolve the no power issue:
(Click on the blue letters to get more details about each step)
-
Examine the adapter and power cord for physical damage
-
Test the power from the AC wall outlet to the notebook connector
-
Start the computer using the battery only
-
Check that the lid switch moves freely
-
When you have completed the troubleshooting steps, there should be power available to the computer. When you press the power button, the LEDs should glow, and you should hear the sounds of the fan and the hard drive spinning.
-
If the battery does not accept the charge or the notebook does not turn on without the AC adapter, contact HP to order a replacement battery.
-
If the LEDs do not glow, and there are no other indicators of power being available to the computer, contact HP for technical assistance in troubleshooting a potential problem with the AC power connection or the system board.
-
If the LEDs blink, or the computer beeps, but it does not start, go to HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot.
-
If the LEDs glow but the computer does not start on either battery or AC power, go to Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
-
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!
11-24-2019 11:02 AM
@kadenmclain Welcome to HP Community!
Perform the below steps:
If the computer does not start, the LED lights do not glow, and the display is black,
you can perform one or more of the following actions to resolve the no power issue:
(Click on the blue letters to get more details about each step)
-
Examine the adapter and power cord for physical damage
-
Test the power from the AC wall outlet to the notebook connector
-
Start the computer using the battery only
-
Check that the lid switch moves freely
-
When you have completed the troubleshooting steps, there should be power available to the computer. When you press the power button, the LEDs should glow, and you should hear the sounds of the fan and the hard drive spinning.
-
If the battery does not accept the charge or the notebook does not turn on without the AC adapter, contact HP to order a replacement battery.
-
If the LEDs do not glow, and there are no other indicators of power being available to the computer, contact HP for technical assistance in troubleshooting a potential problem with the AC power connection or the system board.
-
If the LEDs blink, or the computer beeps, but it does not start, go to HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot.
-
If the LEDs glow but the computer does not start on either battery or AC power, go to Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
-
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!