-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- My HP printer is stuck in validation mode

Create an account on the HP Community to personalize your profile and ask a question
11-03-2026 06:08 PM
Hi @stmac,
Your OfficeJet Pro 9015e is stuck validating the new cartridges. Let's reset it:
Option 1 – Power reset
- With the printer on, unplug the power cord from the printer and from the wall.
- Wait 60 seconds, then plug it directly into the wall (no power strip) and turn it on.
Option 2 – Reseat the cartridges
- Open the ink access door, remove each new cartridge and make sure all protective tape is gone.
- Wipe the copper contacts with a lint-free cloth, reinsert each one until it clicks and close the door.
- Keep the printer connected to the internet ("e" printers validate cartridges online).
If it's still stuck, please let me know if you're using original HP 962 cartridges or Instant Ink. HP can also help directly: https://support.hp.com/contact-hp
I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).
11-07-2026 07:53 PM
Hi @stmac, just following up on your OfficeJet Pro 9015e — did the power reset and reseating the cartridges get it past the validation screen? If it's still stuck, it would help to know whether the new cartridges are original HP 962 cartridges or Instant Ink ones. No rush at all — just let me know how it went whenever you get a chance, and if it worked, marking the reply as the accepted solution would be a great help to other owners with the same problem.
I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).