My pc didn't startup repair by command prompt

[Anurag20]

Automatic startup repair didn't work

[praveen196]

@Anurag20 Welcome to HP Community!

I understand that the Automatic startup repair didn't work.

Do not worry. I will try to fix the issue.

This is happening because Windows cannot start/boot .It may be caused due to simple Windows hung, hardware problem (e.g. your HDD) or it may be caused by faulty Windows Update, some other faulty update/driver, corrupted bootloader / Boot Configuration Data in Windows etc....

Did you perform some change to the PC before the issue started - like software installation/update, Windows update ?

1. Perform some basic hardware checks to rule out hardware problem

- Please, shutdown the computer using the power button (pressed and hold for a few seconds until PC powers off)

- Power the computer back on.

As soon as you press the power-on button, immediately begin hitting the Esc button (like tap-tap-tap) before any logo appears. This should open a HP Startup Menu

- Choose F2 to open System Diagnostics. Follow the on-screen instructions to perform System Test >> Quick test.

This will check major hardware componets for issue (do it just in case) . Here is more info >> https://www.youtube.com/watch?v=6JXUp43ahHA

If there are no system checks/no quick tests, perform HDD (hard disk drive) and RAM check (memory check).

Let me know the test results. If the tests pass without issues, continue. If not, please, let me know

2. Repeat steps 1-2 above but when HP Startup menu opens, please choose F11 for System Recovery options.

The computer should boot from it's recovery partition to open you various recovery options. Note, that F11 option will only work if the recovery partition is there (not deleted) and intact. From there, you have prenty of options to choose from. Every HP computer comes with recovery partition present to assist in tough moments.

Please, perform "System Restore" first in an attempt to fix the issue. Please, restore back to previous days (restore point) where the issue was not present. Here is more info:

>> http://support.hp.com/us-en/document/c03327545#AbT5

>> https://www.tenforums.com/tutorials/4588-system-restore-windows-10-a.html

The above link is 3rd party and is not owned by HP, I've posted this only so that I may help you resolve this issue by going beyond my support boundaries, please ignore the ads and take only the free suggestions

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!