Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP 15-DA0001NE Laptop
Microsoft Windows 10 (64-bit)

Hello everyone. I recently bought a New i3 8th gen hp laptop. I am very disappointed with it as it runs very slow and is unusable most of the time. Even if i am running just running chrome it crashes

Please help

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@Rashed2 

With a Win10 PC, you're almost always going to experience a very slow PC at times because Windows Update (WU) is hogging your PC, searching for, downloading, and installing updates -- to bring your PC up to the most current version of Windows.

And, when it does that, it can force the disk usage to 100% and drive up the processor load -- and keep them both pinned there for some time.

This process is complicated by new Win 10 patches coming out nearly every Tuesday -- as one did last week.

Some folks have been told that resetting your PC will fix this. but, if you reset your PC, you only make matters WORSE! Why? Because you will reset Win10 back to the original version that came preloaded on the PC and that will restart Windows Update all over again.

To find out what version and build of Win10 your PC is running, do the following:
1) enter "cmd" (without the quotes) into the search area and select the Command Prompt option
2) enter "winver" into the command window (again, without the quotes)
3) the most current Win10 version (as of 3/25/19) is v1809 Build 17763.379

If yours is older than that, most likely WU is hogging your PC trying to update it.

To disable WU temporarily, do the following:
1) Enter "services" in the search area (again, without the quotes)
2) When the window opens, scroll down until you see Windows Update
3) If it say Running under status, that indicates that WU is running
4) To change that, double-click on that task, select Stop under the Service status, and then Apply
5) That should stop WU -- and you should see an immediate improvement in performance

If not, then WU is not the problem -- and in that case, while this PC is still under warranty, you should contact HP Customer Support directly to have them put you in touch with HP Technical Support to see what they can do about troubleshooting and repairing your machine remotely.

I did this recently and the HP Tech was able to remotely access my PC from the Internet to check out the problems.

If they are unable to fix your PC, then you need to explore what options you have to get it replaced under the warranty.

If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

NOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while!

If you have trouble finding a phone number, then try: 1 (650) 857-1501.

You can also try contacting Tech Support directly using 1 (800) 474-6836.



I am a volunteer and I do not work for, nor represent, HP

View solution in original post

3 REPLIES 3
HP Recommended

@Rashed2 

With a Win10 PC, you're almost always going to experience a very slow PC at times because Windows Update (WU) is hogging your PC, searching for, downloading, and installing updates -- to bring your PC up to the most current version of Windows.

And, when it does that, it can force the disk usage to 100% and drive up the processor load -- and keep them both pinned there for some time.

This process is complicated by new Win 10 patches coming out nearly every Tuesday -- as one did last week.

Some folks have been told that resetting your PC will fix this. but, if you reset your PC, you only make matters WORSE! Why? Because you will reset Win10 back to the original version that came preloaded on the PC and that will restart Windows Update all over again.

To find out what version and build of Win10 your PC is running, do the following:
1) enter "cmd" (without the quotes) into the search area and select the Command Prompt option
2) enter "winver" into the command window (again, without the quotes)
3) the most current Win10 version (as of 3/25/19) is v1809 Build 17763.379

If yours is older than that, most likely WU is hogging your PC trying to update it.

To disable WU temporarily, do the following:
1) Enter "services" in the search area (again, without the quotes)
2) When the window opens, scroll down until you see Windows Update
3) If it say Running under status, that indicates that WU is running
4) To change that, double-click on that task, select Stop under the Service status, and then Apply
5) That should stop WU -- and you should see an immediate improvement in performance

If not, then WU is not the problem -- and in that case, while this PC is still under warranty, you should contact HP Customer Support directly to have them put you in touch with HP Technical Support to see what they can do about troubleshooting and repairing your machine remotely.

I did this recently and the HP Tech was able to remotely access my PC from the Internet to check out the problems.

If they are unable to fix your PC, then you need to explore what options you have to get it replaced under the warranty.

If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

NOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while!

If you have trouble finding a phone number, then try: 1 (650) 857-1501.

You can also try contacting Tech Support directly using 1 (800) 474-6836.



I am a volunteer and I do not work for, nor represent, HP
HP Recommended

hp laptop, model IS-db0598na

I have sorted the updates, but still start up is slow.  I have to use the windows button to speed up start up.

Is it possible that the hp product startup is slowing down start up, and how can i disable it?

Thanks.

HP Recommended

This was very helpful thank you.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.