Preparing Automatic Repair

[MDKehrer]

HP Envy

Preparing Automatic Repair

[Gaya1239]

Hi @MDKehrer,

Welcome to the HP Support Community

I understand you are facing an issue with your HP Envy Preparing Automatic Repair. Not to worry I will help you to get a resolution to resolve the issue.

May I know

• Since when are you facing this issue
• Have you made any changes on your PC post that this issue raised
• Could you please elaborate on the issue?

To assist better:

• May I have the exact name of the model of the product? Refer to this document for steps to find the product details. Do not share your personal information such as serial, phone number, email ID, etc.
  
  Meanwhile
  
  Please try the following Troubleshoots steps. 

1.    Turn off the Unit.

2.    Disconnect the AC adapter.

3.    Remove any discs from the disc drive.

4.    Remove memory cards from the card reader slot.

5.    Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives, and USB flash drives.

6.    Disconnect the AC adapter press and hold the power button for approximately 15 seconds.

7.    Reconnect the AC adapter, and then turn on the computer.

Step 2
 

Turn off the unit and please press and hold the Windows key + letter B key and the power button together for 30 seconds after 30 seconds, 1st release the power button but keep holding the Windows key and B key for ten more seconds and then release these two keys If done correctly, you will see the display flashing once. Please attempt it thrice as this step and Restart the unit

Step3

The unit has to be turned off, Press Win+ V while holding these two keys then Press the Power button, continue to hold all three keys for 30 seconds and then release the Power button first and then release these two keys Please attempt it thrice  and then you may get a Pop-Up CMOS Check and it will restart the unit 

Even if you don't get a Pop-up restart the unit manually after 3 attempts.

After the above  troubleshooting steps if the unit  turns on 

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution.