-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Operating System and Recovery
- Required Access to Bios Advanced Settings

Create an account on the HP Community to personalize your profile and ask a question
08-02-2026 03:04 PM
I have heard that the BIOs advanced settings are locked and have tried every way to try and unlock it or bypass the issue. I'm trying to switch OS from Windows 11 to Linux Mint Cinnamon, but the computer is blocking Linux from seeing my drivers after I finally found a way to install it to my computer. I need to find some way to unlock the advanced BIOs. There has got to be some way to unlock it even if the HP system has it completely blocked. Isn't there something to get the HP systems to stop having it completely blocked? Some sort of administrator command or something?
08-02-2026 07:57 PM
Alright, this is some of the most locked down BIOS ever, but you can still install linux.
1. Disable Secure Boot
2. Use a linux distro with newer, more stable krnl support
3. Make sure that u boot the installer into UEFI mode
4. After installation, run the driver manager inside Linux to load missing modules
If Linux still cannot see the hardware, it is because the HP 14‑ep firmware blocks certain drivers until Secure Boot is off. There is no way to unlock the advanced BIOS menu on this model.
08-02-2026 08:52 PM - edited 08-02-2026 08:53 PM
Welcome to our HP Community forum!
- Boot the USB Installer: Insert your bootable Linux Mint USB drive, power on the laptop, and tap F9 repeatedly to bring up the HP Boot Menu. Select your USB drive.
- Edit the Linux Boot Options: When the black Linux Mint boot menu appears (where it says "Start Linux Mint"), do not press Enter. Instead, press the "E" key on your keyboard to open the GRUB boot parameter editor.
- Add the Storage Controller Bypass: Look at the lines of text on the screen and locate the line that ends with the words quiet splash. Use your keyboard arrow keys to move right after quiet splash, type a single space, and input the following exact code:
nvme_core.default_ps_max_latency_us=250 - Boot and Install: Press Ctrl + X (or F10) to boot the system. When Linux Mint loads onto your desktop, open the installation wizard. Your internal SSD will now be visible, allowing you to complete your installation normally.
- Open the terminal application inside your newly installed Linux Mint system.
- Type: sudo nano /etc/default/grub and press Enter (type your system password when prompted).
- Find the line that reads: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash".
- Change it to:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nvme_core.default_ps_max_latency_us=250"
5. Press Ctrl + O then Enter to save, and Ctrl + X to exit the editor.
6. Type: sudo update-grub and press Enter to apply the configuration.